English English
220V 0.75kw bevel reductor gearbox R57

220V 0.75kw bevel reductor gearbox R57 helical reducer geared motors

220V 0.75kw bevel reductor gearbox R57 helical reducer geared motors

We need the following items from this site : Harmonicdrive.com
Cable and connectors:
1- EWD- MB10- A06- TN3 10meter 1pcs
in http://www.harmonicdrive.net/_hd/content/DOCUMENTS/SHASGANDCGMANUAL.pdf
2- EWD- S10A08- 3M14 10meter 1pcs
in http://www.harmonicdrive.net/_hd/content/DOCUMENTS/SHASGANDCGMANUAL.pdf
3- EWA- RS03 10meter 1pcs
in page 273 in www.harmonicdrive.net/_hd/content/documents/HA800.pdf
4- CNK- HA80A-S1 2pcs
in page 273 in www.harmonicdrive.net/_hd/content/documents/HA800.pdf
5- CNK-HA80A-S2 2pcs
in page 273 in www.harmonicdrive.net/_hd/content/documents/HA800.pdf
Connectors:
1- 10114-3000PE 2pcs
Cover:
10314-52F0-008
2- 10150-3000PE 2pcs
Cover:
10350-52F0-008
3- FKIC2,5/5-ST-5.08 2pcs
4- FKC2,5/5-ST-5.08 2pcs
Could you please send your PI?
Have a situation where I require a reduction gearbox for Wind turbine.
Input is 800 to 1200RPM require 300 output RPM could you please provide me with information on gearboxes in (and around) this range,

Is that the price for 1 sample ? What is the price when we order 20-50 units?
Pls also advice us, for this power 211KW, where can we find in your spec?. tks n rgds tjuan
I’m interested in your product Cheap price 2016 new 260l concrete mixers, I would like some more details.
I look forward for your reply.
How price for 1 set 260L and fee shipping to malaysia?
Yup.. right, the green one
Dear I think your data 211KW is wrong.
The right power is in the sheet I have sent you.
How about if i only buy that conrete motor only without the body of concrete mixer.. Have you sell it?
Pls advice is this gear reducer come with motor?
Merhaba,
bu ürün ilgimi çekti. Marka Yeni EASYMIX Davul Taşınabilir inşaat kullanımı için sıva Mikser, Öğrenmek istediğim bir kaç detay var.
Yanıtınızı bekliyorum.
One unit can be 120 liters or 150 liters
12volt nm torque about 15-20
12 volt... are you asking a different question than I am answering? 12 volt power
Good morning. I would like to buy 2 sets of this portable concrete mixer. 220V, 120L. Please let me know the price asap.
One from each of these two types
Please provide me with a quote on a replacement for the following gearmotor:
I’m interested in your product China OEM 1.5KW 2HP 4P worm gear motors with motor, I would like some more details: with an output speed of 60rpm
What is the best price you can offer including shipment to Zimbabwe?
The prices you telling me are different from those written in your advertisement. I would like to send them to Urumqi city. Do you have the concrete mixers for up to 100-130USD?
Hello, may name is Elena Lesnikova I'm CEO of Young-Lin Technology LTD, HK We are supplier of the equipmnet for alcohol industry to Russia, we are looking for the manufacturer of the gearmotor BWD. Could you please give the quitation with the delivery cost for follow gearmotors: BWD 14-23-7,5 with electric motor -1 ps BWD 13-23-5,5 with electric motor -1 ps Station of destination is Novosibirsk, Russia Pls send us your quotation ASAP
ratio is 20:1 power 2hp 4 pole

220V 0.75kw bevel reductor gearbox R57 helical reducer geared motors

We are in the process of sourcing 12V DC motor with worm gear.
Below are specifications:
diameter / model - D76
power 200W-280W
12V
No-load speed: 120 - 180 RPM
Load speed: 110 - 150 RPM
NOTE: Gear Ratio is very important has to be 1:30 - 1:40
Please let me know if you can produce this type of motor.
Please contat me directly
Thank you very much

I’m interested in your product High efficiency 1.5KW 2HP 4P worm gear motors for conveyor belt, I would like some more details:
What is the best price you can offer for output speed of about 60rpm on a vertical tank mixer
Thanks for contacting me, I would like if you send me the price of a 5 hp gearmotor, and 20 outputs. Then attach an image with the specifications I want
We are currently working on a project that needs the following products:
228 Pcs Size R37, Foot Mounted Helical Gearbox, Without Motor. Please note that this Gearbox will not be used for any production purposes, it will only be used for training, therefore, input and output, power, speed and torque are not important.
We would expect that any orders will be placed in September or October 2017, but this cannot be guaranteed.
Dear I have sent email to you.
Please check it again,thank you.
1.Our brand is Guomao in China.
2.Yes,we make low-voltage three-phase AC asynchronous induction motors.
3.The output speed of electric motor is 3000RPM, 1500RPM,1000RPM and 750RPM.
4.The quality of our electric motor is good.
5.Yes,our electric motors are ISO certified.
6.The delivery time FOB China is about 5 days.
7.The guarantee period of your motors is 1 year.
8.Yes we can do that.
9.Bearing brand: SKF brand.
10.Yes we have customers in Russia.
Could you tell me the power you need?
We are interested in spur gear, sprockets and sheaves , not in complete gears.
Thanks for contacting me, I would like if you send me the price of a 5 hp Gearmotor, and 20 outputs. Then attach an image with the specifications I want
SEW TYPE REDUCING ENGINE WITH INTEGRATED BRAKE, ACCORDING TO PHOTO WITH 5 HP ENGINE AND 30 HP HIGH TORQUE OUTPUT POWER AT 3 RPM.
Thank you for your response
We are in the process of redesigning a winch that will be lifting 10 KG weight,
Looking for suitable motor.
Please advise if you can produce motor to the specs?
Do you have 30:1 - 40:1 gear reduction for the D76 motor?
Initially we will need to order the samples - we will pay for samples and shipping ofcorse
then first order is 1000 pieces / year and then we hoping to increase based on the sales

220V 0.75kw bevel reductor gearbox R57 helical reducer geared motors

We are working on a new machine, for the prototype we need :
Sprockets chain#35 :
6 pc's 15 teeth DIALER
24 pc's 15 teeth 20 mm bore with a screw
6 pc's 17 teeth 20 mm bore with a screw
6 pc's 13 teeth 20 mm bore with a screw
6 pc's 19 teeth 20 mm bore with a screw
6 pc's 16 teeth 20 mm bore with a screw
12 pc's 60 teeth 20 mm bore with a screw
30 Meter chain #35 and 30 keys.
Spur gear:
Module 1.5
Tooth width "B"
Pressure angle 20 deg,
Bore 20 mm with two screws.
6 pc's 30 teeth
6 pc's 46 teeth
Aluminium Pullies /sheaves
12 pc's 200 mm with 20 mm bore and a screw in order to tie it to the shaft
12 pc's 50 mm with 20 mm bore and a screw in order to tie it to the shaft attached the dimensions for the pulley.
please send me a quote and when you can ship them out.
Quote price these items pls!
1.XWD7-87-3 01 Unit
2.BWD5-29-15 01 Unit
3. BWD5-29-3 01 Unit
Please check the price,thank you.
Product Quantity UNIT EXW price (USD)
15 teeth 20 mm bore with a screw 24 0.9
17 teeth 20 mm bore with a screw 6 0.95
13 teeth 20 mm bore with a screw 6 0.89
19 teeth 20 mm bore with a screw 6 0.98
16 teeth 20 mm bore with a screw 6 0.96
60 teeth 20 mm bore with a screw 12 1.5
30 Meter chain #35 and 30 keys 1 220
200 mm with 20 mm bore and a screw 12 56
50 mm with 20 mm bore and a screw 12 48
Do you want to ship it by sea or by air?
we are looking at 200W - 250W power
76mm - diameter of the motor

We ask you to send to us the catalog of your low-voltage tree-phase AC
asynchronous induction motors.
Please send me the quotation for items below:
1. KA97BDV160M4/BM/HF Sew/Singapore 01 set
2. 97/TDV160M4/BM/HF/CM4A Sew/Singapore 01 set
3. R87DT80N4 Sew/Singapore 01 set
4. R67DV132S4 Sew/Singapore 01 set
5. BBP1416/3225;3232KW;80A (U,V,W) SEW/ China 01 set
6. 4TKCV225NE SEW/ China 01 set
Nguyen-HTT
Please check the attached catalog.
1.Our catalog is in English.
2.0.12KW-200KW
3.Both end-users and trading companies.
Can you deliver BLDC permanent magnet motor 40 Kw nominal 80 Kw peak, about 3000 Rev with gaerbox 4:1 to reach about 800 rev on the outgoing shaft
do you have more pic's , technical spec and drawings from this motor ??
If any requirement is there we will send enquiry to you .At percent no need any materials
its too expensive, make me a better price, now we want to buy 2 for our prototype later we need more of this type , and 2 X 80 kw
Inquiry Product: Helical Geared motors
Message Body:
I want 1 PCs of this gear box i am from india in nellore so how much the price and how to get it me
We would like to introduce that we are from the Integrated Engineering Services team providing various solutions to our global clients with approach Like Designing, Design Validation, Design Support, Prototype Manufacturing, Physical Validation, Sourcing etc.
Presently we are looking at business partner who could support to Tech Mahindra in providing best Geared Motors for Global requirement.
Thanks for the info, can you provide this model below? Is HA32 R 5.38
The best price I can give you is 5890 € per piece.
Is it OK?
If you have any questions please feel free to let me know,thank you.
Waiting for your kind reply.

220V 0.75kw bevel reductor gearbox R57 helical reducer geared motors

Thanks for your reply.
If your order is 5000 Nos,the best price we can give you is USD130.
I am being asked to quote a variator PRC102 according to photo below. From this model I have no technical information, just an exploded view, that attached.
Can you quote? Thanks
Monica
MOTOVARIO, Modelo PRC/102 , montaje B3, i= 15.1,
Thanks for your support and positive response for the requirement.
Pl. re - confirm the Price and also suggest the Gear- Motor with same specification within target price $115 per set EX-works
Is the speed reducers and gearboxes included?
will you send me pic's , technical spec and drawings
Hello Shirley, can you deliver this motors on 120 V ??
hi we have a motor and gearbox on a former or bending machine and the motor was getting hot we would like to replace the whole unit do you have a branch in South Africa as we need the parts urgently
the motor size is :type 100L2-4
3 KW 50HZ 6.50A 380V
F B5 A 2#
srn: 08161100332
Good morning, can you make a torque multiplier for use in a pulsed hydro system?
Example two-axle box, 12 rpm / 300 kw input, 24 rpm output, 600 kw?
Gearbox of 4 axis,
Input 2200 rpm / 300 kw diesel engine
Input 1750 rpm electric motor
Output A- 900 rpm pump
Output B- 24 rpm torque multiplier
Is this information useful for you? My client does not know the motor power
15 HP 1500 rpm
thanks for your email. First of all tell me what is difference between Sogo gears and Goumao reducer companies.
then tell me what price for cycloidal gearmotor
motor power 1.2kw and 1.5 kw
motor rpm 1450
out pur speed 40
pls also send your whatsapp no

220V 0.75kw bevel reductor gearbox R57 helical reducer geared motors

Please quote your best price for the following:
a) Electric motor:
Voltage: 110VAC, Single Phase, 2.2Kw, 1450RPM, B5 Mounting
Qty: 01 No.
b) Electric Motor:
Voltage: 110VAC, Single Phase, 5.5kw, 1450RPM, B5 Mounting
Qty: 01 No.
I am looking for speed reducer input speed 300 - 550 RPM from 150 - 200 HP tractor in agriculture. Input and oout shafts are 1.75" X 20 spline male shafts, contra-rotating. Initial order 2 pcs and then 5 pcs per order thereafter. Do you have speed reducer like this?
Thank you for the catalogue.
R series helical speed reducer and F series parallel speed reducer seem to be close to what I need.
· Do you have more information about these 2 models that O can supply to my customer please?
· Are both these models available with male 1.75” x20 spline shafts.
· Power range is 110 – 150 Kw
· Ratio is 1.84:1
· Do you approximate EXW price for these? MOQ first order is 2 pcs, then 5 pcs each order.
Thank you for information.
Are both these models available with male 1.75” x20 spline shafts?
Thanks for the quotation, I need to confirm the order for the following:
Electric Motor:
Voltage: 110VAC, Single Phase, 5.5kw,
1450RPM, B5 Mounting
Price: USD 259.00/each
Qty: 01 No.
Please let me know the transport charges for qty: 01 No. & Also give us the best price and minimum lead-time delivery.
Please quote your best prices for resale.
Required items:
S.No
Description
UOM
Quantity
1
HELICAL GEARED MOTOR TYPE: SK63-100LA/4 MOTOR POWER 3KW, OUTPUT RPM 18, SHAFT DIA=65 MM, LENGTH=130 MM, MOUNTING POSITION B3/M1
NOS
1
2
HELICAL GEARED MOTOR 4KW, TYPE: SK73-112M/4, OUTPUT RPM 16, OUTPUT SHAFT DIA 80, LENGTH 140, MOUNTING POSITION B3/M1, FOOT MOUNTED
NOS
1
3
HELICAL GEARED MOTOR 5.5KW, TYPE: SK83-132S/4, OUTPUT RPM 18, OUTPUT SHAFT DIA 90, LENGTH 170, MOUNTING POSITION B3/M1, FOOT MOUNTED
NOS
1

dear i need rv30 reducer 1:100
5 pc what is your best price
ok please tell me rv40 price too
yes freand
dear its total 9kg or each one
The weight of RV30 is 3Kg per piece,the weight of RV40 is 5 KG per piece.
The approximate dimensions of the speed reducing gearbox that I am looking for are attached.
Are you able to quote a price for 2 of these kinds of gearbox?
· External dimensions do not need to be exactly the same as this.
· Shafts will be 20 spline 1 .75” shaft but we can sort out the details of the spline later.
· Input RPM will be up to 1000 RPM. Reduction ratio is around 1.8:1
· Power range is 110 – 150 Kw
Can you recommend gearbox from your range and price each for order of 2 pcs?
Dear Sales We're looking to purchase below siemens brand electric motors. We're mine in Mongolia. Please contact through my email This email address is being protected from spambots. You need JavaScript enabled to view it.. then i can send you motor plate pictures. MOTOR/15KW, 3PH 415V 50HZ, 40C Y2(YX3);160L;4/ 421400179 – 4each MOTOR 22KW 3PH 415V 50HZ ;40C Y2(YX3);180L;4/ 421400178 – 4each MOTOR /18.5KW 3PH 415v 50Hz-40C Y2(YX3)-180M-4/ 421400167 – 2each MOTOR 15KW, 965 RPM – 1each Best Regards Chinzo +976 88104102

 Geared Motors And Electric Motor Manufacturer

The best service from our transmission drive expert to your inbox directly.

Get in Touch

Yantai Bonway Manufacturer Co.ltd

ANo.160 Changjiang Road, Yantai, Shandong, China(264006)

T+86 535 6330966

W+86 185 63806647

© 2024 Sogears. All Rights Reserved.