Yantai Bonway Manufacturer

Frame size

Code/Variants

71

80

90

100

112

132

160

180

200

225

250

280

315

355

400

450

5

Protective roof

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

72

Radial seal at D-end. Not possible for 2-pole , 280 and 315 frames

●

●

●

●

●

●

●

●

●

●

●

●

●

-

-

-

73

Sealed against oil at D-end.

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

158

Degree of protection IP65.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

211

Weather protected, IP xx W

●

●

●

●

●

●

●

●

●

●

●

-

-

-

-

-

250

Degree of protection IP66

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

401

Protective roof, horizontal motor.

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

403

Degree of protection IP56.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

404

Degree of protection IP56, without fan and fan cover.

●

●

●

●

●

●

●

●

●

●

●

-

-

-

-

-

434

Degree of protection IP56, open deck

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

-

520

Motor protection cover made of glass fiber. Vertical motor, shaft

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

-

down.

783

Labyrinth sealing at D-end.

-

-

-

-

-

-

●

●

●

●

●

●

●

○

○

○

784

Gamma-seal at D-end.

●

●

●

●

●

●

○

○

-

○

○

-

-

-

-

-

Rating & instruction plates

2

Restamping voltage, frequency and output, continuous duty.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

4

Additional text on std rating plate (max 12 digits on free text line).

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

95

Restamping output (maintained voltage, frequency), intermittent

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

duty.

98

Stainless rating plate

●

●

●

●

●

●

○

○

○

○

○

○

○

○

-

-

126

Tag plate

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

135

Mounting of additional identification plate, stainless.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

138

Mounting of additional identification plate, aluminium.

●

●

●

●

●

●

-

-

-

-

-

-

-

-

-

-

139

Additional identification plate delivered loose.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

159

Additional plate with text “Made in ....”

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

160

Additional rating plate affixed.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

161

Additional rating plate delivered loose.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

163

Frequency converter rating plate. Rating data according to quota

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

tion.

181

Rating plate with ABB standard loadability values for VSD operation.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

Other auxiliaries for VSD operation to be selected as necessary

332

Baldor Catalogue #

●

●

●

●

●

●

●

●

●

●

●

●

●

●

-

-

333

Not for use in the USA

●

●

●

●

●

●

●

●

●

●

●

●

●

●

-

-

360

Cargotec rating plate

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

528

Rating plate sticker

●

●

●

●

●

●

-

-

-

-

-

●

●

●

●

●

818

Restamping as generator

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

Shaft & rotor

69

Two shaft extensions according to catalog drawings.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

70

Special shaft extension at D-End, standard shaft material

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

131

Motor delivered with half key (key not exceeding shaft diameter)

●

●

●

●

●

●

●

●

●

●

●

-

-

-

-

-

155

Cylindrical shaft extension, D-end, without key-way.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

164

Shaft extension with closed keyway

○

○

○

○

○

○

○

○

○

○

○

●

●

●

●

-

165

Shaft extension with open keyway

-

-

-

-

-

-

●

●

●

●

●

○

○

○

○

○

410

Shaft material stainless steel

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

591

Special shaft extension according to customer specification.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

600

Special shaft extension at N-end, standard shaft material.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

630

Shaft material certificate 3.1/3.2 according to EN10204:2004

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

Standards and Regulations

10

Fulfilling CSA Safety Certificate.

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

208

Fulfilling Underwriters Laboratories (UL), listed requirements

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

252

Shell DEP 33.66.05.31-GEN. February 2012, with standard winding >55

-

-

-

-

-

-

-

-

-

-

-

●

●

●

-

-

kW

331

IE1 motor not for sale for use in EU

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

421

VIK design (Verband der Industriellen Energie- und Kraftwirtschaft

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

-

e.V.).

540

China energy label

●

●

●

●

●

●

●

●

●

●

●

●

●

●

-

-

543

Australian MEPS

-

●

●

●

●

●

●

●

●

●

●

●

●

●

-

-

546

SABS rating plate

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

-

548

Certificate of conformity according TR-CU 004/2011 for customs

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

union RU, KZ, BY, AM, KG.

822

WIMES 3.03i6 Compliant Design for DOL operation

●

●

●

●

●

●

-

-

-

-

-

-

-

●

●

●

823

WIMES 3.03i6 Compliant Design for VSD operation

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

Stator winding temperature sensors

 ○ = Included as standard │ ● = Available as option │ - = Not applicable

 

Frame size

Code/Variants

71

80

90

100

112

132

160

180

200

225

250

280

315

355

400

450

120

KTY 84-130 (1 per phase) in stator winding.

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

121

Bimetal detectors, break type (NCC), (3 in series), 130 ºC, in stator

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

winding

122

Bimetal detectors, break type (NCC), (3 in series), 150 ºC, in stator

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

winding

123

Bimetal detectors, break type (NCC), (3 in series), 170 ºC, in stator

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

winding

124

Bimetal detectors, break type (NCC), (3 in series), 140 ºC, in stator

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

winding

125

Bimetal detectors, break type (NCC), (2x3 in series), 150 ºC, in stator

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

winding

127

Bimetal detectors, break type (NCC), (3 in series, 130 ºC & 3 in series,

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

150 ºC), in stator winding

435

PTC - thermistors (3 in series), 130 ºC, in stator winding

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

437

PTC - thermistors (3 in series), 170 ºC, in stator winding

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

438

PTC - thermistors (3 in series), 190 ºC, in stator winding

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

439

PTC - thermistors (2x3 in series), 150 ºC, in stator winding

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

441

PTC - thermistors (3 in series, 130 ºC & 3 in series, 150 ºC), in stator

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

winding

442

PTC - thermistors (3 in series, 150 ºC & 3 in series, 170 ºC), in stator

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

winding

445

Pt100 2-wire in stator winding, 1 per phase

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

446

Pt100 2-wire in stator winding, 2 per phase

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

502

Pt100 3-wire in stator winding, 1 per phase

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

503

Pt100 3-wire in stator winding, 2 per phase

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

511

PTC thermistors (2 x 3 in series), 130 ºC, in stator winding

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

515

Pt100 3-wire in stator winding, 3 per phase

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

Terminal box

15

Motor supplied in D connection.

●

●

●

●

●

●

●

●

●

●

●

-

-

-

-

-

17

Motor supplied in Y connection

●

●

●

●

●

●

●

●

●

●

●

-

-

-

-

-

19

Larger than standard terminal box.

●

●

●

●

●

●

-

-

-

-

-

●

●

●

●

-

20

Detached terminal box

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

21

Terminal box LHS (seen from D-end).

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

-

22

Cable entry LHS (seen from D-end).

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

157

Terminal box degree of protection IP65.

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

180

Terminal box RHS (seen from D-end).

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

-

230

Standard metal cable gland.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

-

-

277

Cable sealing end unit, size small for C-opening

-

-

-

-

-

-

-

-

-

-

-

●

-

-

-

-

278

Cable sealing end unit, size medium for D-opening

-

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

279

Cable sealing end unit, size large for D-opening

-

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

292

Adapter C-C

-

-

-

-

-

-

-

-

-

-

-

●

-

-

-

-

293

Adapter D-D

-

-

-

-

-

-

-

-

-

-

-

-

●

●

-

-

294

Adapter E-D

-

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

295

Adapter E-2D

-

-

-

-

-

-

-

-

-

-

-

-

●

●

●

○

296

Adapter E-3D

-

-

-

-

-

-

-

-

-

-

-

-

-

-

●

●

351

Terminal block turned according to cable entry

-

-

-

-

-

-

-

-

-

-

-

●

●

-

●

●

375

Standard plastic cable gland

●

●

●

●

●

●

●

●

●

●

●

-

-

-

-

-

376

Two standard plastic cable glands

●

●

●

●

●

●

●

●

●

●

●

-

-

-

-

-

380

Separate terminal box for temperature detectors, std. material

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

400

4 x 90 degr turnable terminal box.

●

●

●

●

●

●

○

○

○

○

○

○

○

○

-

-

413

Extended cable connection, no terminal box.

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

418

Separate terminal box for auxiliaries, standard material.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

444

Adapter E-2E

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

447

Top mounted separate terminal box for monitoring equipment.

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

466

Terminal box at N-end.

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

467

Lower than standard terminal box and rubber extended cable. Cable

-

-

-

-

-

-

●

●

●

●

●

-

-

-

-

-

length 2 m

468

Cable entry from D-end.

●

●

●

●

●

●

●

●

-

●

●

●

●

●

●

-

469

Cable entry from N-end.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

-

526

Existing cable entries plugged

○

○

○

○

○

○

○

○

○

○

○

○

●

●

-

-

553

Terminal box degree of protection IP66.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

-

554

Cast iron flange for cable glands drilled and tapped according to

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

order.

557

Nickel plated cable glands mounted according to order

-

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

 ○ = Included as standard │ ● = Available as option │ - = Not applicable

 

Frame size

Code/Variants

71

80

90

100

112

132

160

180

200

225

250

280

315

355

400

450

565

Adapter for terminal box on the side (RHS)

-

-

-

-

-

-

-

-

-

●

●

●

●

●

●

-

566

Adapter for terminal box on the side (LHS)

-

-

-

-

-

-

-

-

-

●

●

●

●

●

●

-

567

Separate terminal box material: cast Iron

-

-

-

-

-

-

○

○

○

○

○

●

●

●

●

●

568

Separate terminal box for heating elements, std. material

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

569

Separate terminal box for brakes

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

624

Prepared for inch cable glands according to BSPP standard.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

727

Stainless steel flange for cable glands drilled and tapped according

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

to order.

730

Prepared for NPT cable glands.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

731

Two standard metal cable glands.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

740

Prepared for PG cable glands.

-

-

-

-

-

-

●

●

●

●

●

-

-

-

-

-

742

Protective cover for accessory terminal block in main terminal box

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

743

Non-drilled cast iron flange for cable glands

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

744

Stainless steel non-drilled flange for cable glands.

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

745

Painted steel flange equipped with nickel plated brass cable glands

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

746

Stainless steel cable flange equipped with standard nickel plated

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

brass cable glands

Testing

140

Test confirmation.

-

-

-

-

-

-

●

●

●

●

●

-

-

-

-

-

145

Type test report from a catalogue motor, 400V 50Hz.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

146

Type test with report for one motor from specific delivery batch.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

148

Routine test report.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

149

Test according to separate test specification.

-

-

-

-

-

-

●

●

●

●

●

-

-

-

-

-

150

Customer witnessed testing. Specify test procedure with other

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

codes.

222

Torque/speed test, type test and multi-point load test with report

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

for one motor from specific delivery batch.

560

Shaft voltage test.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

561

Overspeed test,for one motor from specific delivery batch

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

562

Overvoltage test.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

760

Vibration level test

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

761

Vibration spectrum test for one motor from specific delivery batch.

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

762

Noise level test for one motor from specific delivery batch.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

763

Noise spectrum test for one motor from specific delivery batch.

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

764

Test for one motor from specific delivery batch with ABB frequency

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

converter available at ABB test field. ABB standard test procedure.

Variable speed drives

429

Separate motor cooling (fan top, N-end) and 1024 pulse tacho (Leine

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

& Linde 861) mounted.

470

Prepared for hollow shaft pulse tacho (L&L equivalent).

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

472

1024 pulse tacho (L&L 861007455-1024).

-

-

-

-

●

●

●

●

●

●

●

●

●

●

●

●

473

2048 pulse tacho (L&L 861007455-2048).

-

-

-

-

●

●

●

●

●

●

●

●

●

●

●

●

474

Separate motor cooling (axial fan, N-end) and prepared for hollow

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

shaft tacho (L&L equivalent)

476

Separate motor cooling (axial fan, N-end) and 1024 pulse tacho (L&L

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

861007455-1024)

477

Separate motor cooling (axial fan, N-end) and 2048 pulse tacho (L&L

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

861007455-2048)

478

Separate motor cooling (fan on top, N-end) and prepared for hollow

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

shaft tacho (L&L equivalent)

479

Mounting of other type of pulse tacho with shaft extension, tacho

-

-

-

-

-

-

-

●

●

-

●

●

●

●

●

●

not included.

486

Separate motor cooling (fan top, N-end) and prepared for DC-tacho.

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

510

Separate motor cooling (fan top, N-end) and 2048 pulse tacho (Leine

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

& Linde 861) mounted.

570

Prepared for hollow shaft pulse tacho (L&L 503).

-

●

●

●

●

●

-

-

-

-

-

-

-

-

-

-

572

1024 pulse tacho (L&L 503).

-

●

●

●

●

●

-

-

-

-

-

-

-

-

-

-

573

2048 pulse tacho (L&L 503).

-

●

●

●

●

●

-

-

-

-

-

-

-

-

-

-

582

1024 pulse tacho, GHK912-GBR-1024, BEI IDEACOD

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

583

2048 pulse tacho, GHK912-GBR-2048, BEI IDEACOD

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

588

Shaft grounding device

-

-

-

-

-

●

●

●

●

●

●

-

-

-

●

●

658

Special tacho mounted, price category 1

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

659

Special tacho mounted, price category 2

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

660

Special tacho mounted, price category 3

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

680

2048 pulse tacho, Ex d, tD, L&L 841910001

-

-

-

-

-

-

●

●

●

●

●

-

-

-

-

-

 ○ = Included as standard │ ● = Available as option │ - = Not applicable