English English
Factory  540 PTO

Factory 540 PTO Transmission bevel/helical gear agricultural machinery gearbox for lawn mower LF205

Factory  540 PTO Transmission bevel/helical gear agricultural machinery gearbox for lawn mower LF205

Product overview:

JWM spiral elevator is a basic lifting component, which has many advantages such as compact structure, small volume, light weight, wide power source, no noise, convenient installation, flexible use, multiple functions, multiple supporting forms, high reliability, long service life, etc. It can be used individually or in combination, and can accurately control and adjust the lifting or pushing height according to certain procedures. It can be directly driven by motor or other power, or it can be manually driven. It has different structure and assembly forms, and the lifting height can be customized according to user requirements.

Performance characteristics:

1. Low speed and low frequency: mainly used in places with heavy load, low speed and no need to work frequently.

2. The spiral elevator (trapezoidal screw type) is economical in price, compact in structure, simple in operation and convenient in maintenance.

3. It is suitable for low speed and low frequency applications. Its main components are: precision trapezoidal screw pairs and high-precision worm gear pairs.

4. Holding load: The trapezoidal screw rod has a relative locking function (large speed ratio), which can hold load even without brake device.

Note: The self-locking function may fail when subjected to large vibration and impact loads. In this case, apply a brake device or equip a brake motor.

Technical parameters:

1. Input power: 0.36-21.4KW

2. Pitch range: 6-25mm

3. Bearing range: 2.5T-120T

4. Lifting speed: 150mm/min ~ 1800mm/min

5. Structure: motor direct connection, single input shaft, double input shaft

ARA series spiral bevel gear steering box

Product features:

 

Features of ARA series spiral bevel gear steering box:

ARA series steering box has excellent performance, small size, all-round installation, light weight, aluminum alloy shell, and axle shall be made of corrosion-resistant steel, which shall be noted when ordering. The lubricant has been added to the ARA series spiral bevel gear steering box when leaving the factory. The input and output modes are multi-directional and diverse. Wide application range, large torque, low noise and long service life.  

ARA steering box, standardized, multi variety, speed ratios 1:1, 1.5:1, 2:1, 3:1 are all actual transmission ratios. The average efficiency is as high as 98%.

The spiral bevel gear steering box can operate in both positive and negative directions, with stable transmission at low speed or high speed, low noise, small vibration and large bearing capacity.

The gear is made of high-quality high-purity alloy steel 20CrMnTiH by carburizing, quenching and grinding.

The input and output modes of ARA series spiral bevel gear steering box adopt a multi-directional structure, and the output modes are diverse. Wide application range, large torque, low noise and long service life.

 


Technical parameters:

 

Transmission ratio: 1:1, 2:1

Power: 0.018KW~4.94KW

Torque: 6.95~46.8Nm

Factory  540 PTO Transmission bevel/helical gear agricultural machinery gearbox for lawn mower LF205

G series totally enclosed gear motor

Product overview:

1. G series reducer has the overall structure, light weight and strong adaptability;

2. G gear reducer hard tooth surface helical transmission, low noise, high efficiency;

3. G fully enclosed full life electromechanical integration design of small gear reducer;

4. The electromagnetic brake can be attached.

Technical parameters:

1. Motor power: 75W~3700W

2. Output speed: 7.5 ~ 570r/min

3. Output torque: up to 1420N. m

4. Installation type: H-foot type V-flange type

Performance characteristics:

1. Output speed: 6.9 ~ 460r/min

2. Output torque: up to 1500N. m

3. Motor power: 0.12KW~4KW

4. Installation type: H-foot type V-flange type

 

SBD Series Schenck Scale Special Reducer

BD special reducer for belt weigher is a novel transmission device specially designed and manufactured for Schenck. Schenck reducer has good performance and compact structure. Schenck claims that the special reducer has a long service life, convenient installation and maintenance, and has a high reputation in the industry.

 

Performance characteristics:

SBD series special reducer for Schenck scale is a planetary cycloid drive for the front reduction, and a spiral bevel gear drive for the rear reduction. It is widely used in speed regulating scales in metallurgy, cement, steel, mining, coal, chemical and other industries. There are generally two types of SBD50 and SBD65 matching TDG speed regulating scales, with the power of 0.37KW-1.5KW. The SBD75 model with large flow shall be equipped with corresponding power according to the output of the user's machine hour. Meanwhile, it shall indicate whether to install left or right according to the on-site process and space size.

 

Technical parameters:

The secondary transmission of the machine is composed of two parts. The first part (high speed stage) uses the internal tooth as the pin. The external gear is short cycloidal gear, and the second part (low speed stage) is spiral bevel gear. After heat treatment and quenching, the hardness of shaft hole output transmission gear reaches HRC58-60. It is a hard tooth surface reducer with high speed ratio, high efficiency, compact structure, small size, stable operation, low noise, long service life, and positive and negative rotation.

This reducer is applicable to all kinds of conveying equipment, specially designed and developed for the cement conveying industry. The SBD50 type SBD65 type power is generally 0.37KW-1.5KW. The corresponding power shall be configured according to the user's hourly output, and the left or right installation shall be indicated according to the on-site process and space size.

Factory  540 PTO Transmission bevel/helical gear agricultural machinery gearbox for lawn mower LF205

P series planetary gear reducer

Product overview:

1. Reducers are widely used in metallurgy, mining, hoisting and transportation, power, energy, building materials, light industry, transportation and other industrial sectors.

2. The P series planetary reducer adopts the involute planetary gear transmission, making rational use of internal and external meshing and power distribution.

3. The planetary reducer adopts modular design and can be combined according to customer requirements.

4. All gears are carburized and quenched to obtain a high hard wear-resistant surface. After heat treatment, all gears are ground to reduce noise and improve the efficiency and service life of the whole machine.

5. The gear reducer is characterized by light weight, small volume, large transmission ratio range, high efficiency, smooth operation, low noise, and strong adaptability.

Performance characteristics:

1. Input mode: concentric shaft input, helical gear input, bevel gear helical gear input, bevel gear input.

2. Output mode: internal spline type, hollow shaft shrink disk type, external spline type, solid shaft flat key.

3. The planetary reducer adopts the involute planetary gear transmission, making reasonable use of internal and external meshing and power distribution. Therefore, it has the characteristics of light weight, small volume, large transmission ratio range, high efficiency, smooth operation, low noise, and strong adaptability.

4. The box body is made of ductile iron, which greatly improves the rigidity and seismic resistance of the box body.

5. Modular design is adopted, which can be changed and combined according to customer requirements.

6. Installation type: horizontal installation, vertical installation, torque arm installation.

7. Combined with R series and K series, higher speed ratio can be obtained.

Technical parameters:

Speed ratio range: basic type 25~4000

Torque range: 2.6 ~ 2600000 N · m

Power range: 0.4 ~ 12934 kW

P series planetary gear reducer

The cross axle defects in the field are all shown by the cross movement of the input shaft. There are two main reasons for the formation of tandem shafts:

a. It is due to the broken teeth that the input shaft loses its axial binding, resulting in shaft string;

b. The driven gear on the central shaft is not firmly fastened to the shaft. In practical transmission, due to the non interference between the driven gear and the central shaft, the driven gear is in axial string with respect to the central shaft, thus making the input shaft in axial string.

Therefore, the interference amount is not the primary reason for forming the tandem shaft of the p series planetary gear reducer. For others, the steering of the p series planetary gear reducer also has a certain impact on the tandem shaft.

c. The gear processing deflection forms a series shaft. The machining deflection of the driven gear on the central shaft can form a tandem shaft. The gear processing is performed by locating the outer circle and end face, while the gear equipment is located by the inner hole. Sometimes the inner hole is not concentric with the outer circle, or the inner hole is not perpendicular to the end face, which will cause the center line of the processed gear and the inner hole to deflect. This kind of skewed herringbone gear, the plane of its centerline address is not perpendicular to the axis. When the gear rotates for one circle, a point on the centerline will have an axial reciprocating string once, forcing the input shaft to also perform an axial reciprocating string once.

Factory  540 PTO Transmission bevel/helical gear agricultural machinery gearbox for lawn mower LF205

d. The error of gear helix angle constitutes a serial shaft. The two halves of the driven herringbone gear on the center shaft and output shaft will change the centerline of the herringbone gear due to the error of the practical helix angle, forming a series shaft.

e. When p series planetary gear reducers receive positive and negative torque effects, gear thickness errors, uneven wear and premature wear on the tooth surface, and tooth back deformation form a tandem shaft.

In practical transmission, due to the different degrees of deflection of the two half driven gears, as far as the input shaft is concerned, the occurrence of axial serial motion is the comprehensive effect of different degrees of deflection of the two half driven gears on the central shaft. In addition, the driven gear on the output shaft, due to the same gear processing deflection, forms a series motion, but because the output shaft is fixed in the axial direction, it forces the central shaft to move, thus forcing the input shaft to run.

4.8.2 Handling method:

The strength of the traveling gear, the manufacturing accuracy of the gear, and the roughness value of the descending gear and shaft. The most important thing for equipment accuracy and fastening of driven gear and shaft is to achieve reasonable interference cooperation.

HB series standard high-power gearbox

Product overview:

1. The H/B series standard industrial gearbox adopts a general design scheme, which can be transformed into a special gearbox for the industry according to customer needs.  

2. Realize parallel axis, orthogonal axis, vertical and horizontal universal box, reduce the types of parts, and increase the specifications and models.  

3. The sound absorbing box structure, large box surface area and large fan, cylindrical gear and spiral bevel gear all adopt advanced gear grinding technology, so that the temperature rise

The noise is reduced, the reliability of operation is improved, and the transmission power is increased.  

4. Input mode: motor connecting flange and shaft input.  

5. Output mode: solid shaft with flat key, hollow shaft with flat key, hollow shaft connected by expansion disk, hollow shaft connected by spline, solid shaft connected by spline

Flanged solid shaft.  

6. Installation mode: horizontal, vertical, swing base type, torsion arm type.  

7. H/B series products have 3~26 specifications, reduction drive stages have 1~4 levels, and speed ratio is 1.25~450; And R, K, S series to obtain greater speed ratio.

Technical parameters:

1. Speed ratio range 1.25-450

2. Torque range 2.6-470000kN

3. Power range 0.4-5082kW

ZDY/ZLY/ZSY series hard tooth surface cylindrical gear reducer

Product introduction:

The hardened gear reducer is made of high-quality alloy steel carburized and quenched, and the gear hardness reaches HRC58-62. It is produced according to the national standard (Gb19004-88), mainly including four series: ZDY (single grade), ZLY (two grades), ZSY (three grades) and ZFY (four grades).  

Performance characteristics:

1. High transmission rate of hardened cylindrical gear reducer: single stage greater than 96.5%, double stage greater than 93%, three stage greater than 90%.

2. All gears are made of high-quality alloy steel by carburizing and quenching, and the gear hardness reaches HRC58-62

3. Small size, light weight, high precision, large bearing capacity, long service life, high reliability, stable transmission and low noise.  

Factory  540 PTO Transmission bevel/helical gear agricultural machinery gearbox for lawn mower LF205

4. Generally, oil pool lubrication and natural cooling are used. When the thermal power cannot be met, circulating oil lubrication or fan and cooling coil can be used for cooling

5. The center distance and transmission ratio are mainly optimized, with good interchangeability of main parts and components, easy disassembly and inspection, and easy installation.

Reducer model, specification and representation method:

Model mark:

1. The models are:

ZDY / ZDZ single-stage cylindrical gear reducer;  

ZLY / ZLZ two-stage cylindrical gear reducer;  

ZSY / ZSZ three-stage cylindrical gear reducer;  

ZFY four stage cylindrical gear reducer.  

2. Specifications:

Single stage: ZDY80, ZDY100, ZDY125, ZDY160, ZDY200, ZDY250, ZDY280, ZDY315, ZDY355, ZDY400, ZDY450, ZDY500, ZDY560;  

Two levels: ZLY112, ZLY125, ZLY140, ZLY160, ZLY180, ZLY200, ZLY224, ZLY250, ZLY280, ZLY315, ZLY355, ZLY400, ZLY450, ZLY500, ZLY560, ZLY630, ZLY710;  

Class III: ZSY160, ZSY180, ZSY200, ZSY224, ZSY250, ZSY280, ZSY315, ZSY355, ZSY400, ZSY450, ZSY500, ZSY560, ZSY630, ZSY710

Level IV: ZFY180, ZFY200, ZFY224, ZFY250, ZFY280, ZFY320, ZFY360, ZFY400, ZFY450, ZFY500, ZFY560, ZFY630

Performance and characteristics of WPS precision planetary reducer:

1. The transmission interface of planetary gear adopts full needle roller bearing without retainer, which increases the contact area to improve the structural rigidity and output torque;

2. The 3D/PORE design and analysis technology is adopted to trim the tooth profile and lead of the spiral tooth surface respectively, so as to reduce the impact and noise of the gear on the meshing in and out and increase the service life of the gear train;

3. The gear material is made of high-grade chromium molybdenum vanadium alloy steel, which is quenched, tempered and heat-treated to the base material hardness of 30HRC, and then the gear surface hardness is nitrided to 840HV by the advanced ion nitriding equipment of our factory to obtain the best wear resistance and impact resistance toughness;

4. The planetary boom and output shaft adopt an integrated structural design, and the bearing configuration of the output shaft adopts a large span design to ensure the maximum torsional rigidity and output load capacity;

5. NYOGEL792D synthetic lubricating grease is used, and the sealing design with IP65 protection grade is adopted. The lubricating oil does not leak and is maintenance free;

6. The connection between the input end and the motor adopts a collet type locking mechanism, and the dynamic balance analysis is carried out to ensure the power transmission of the concentricity and zero backlash of the interface under high input speed;

7. The sun gear made of the whole gear bar has strong rigidity and accurate concentricity;

8. The unique modular design of motor connecting plate and bushing is applicable to any servo motor;

9. The surface of the gearbox is treated with non electrolytic nickel, and the motor connecting plate is treated with black anode to improve the environmental resistance and corrosion resistance;

10. The gear box and inner ring gear adopt an integrated design, with compact structure, high precision and large output torque.

 

 Geared Motors And Electric Motor Manufacturer

The best service from our transmission drive expert to your inbox directly.

Get in Touch

Yantai Bonway Manufacturer Co.ltd

ANo.160 Changjiang Road, Yantai, Shandong, China(264006)

T+86 535 6330966

W+86 185 63806647

© 2024 Sogears. All Rights Reserved.