English English
Gear motor with 7,5 Hp, 1500Rpm Ratio 1:50 with a helical gear

Gear motor with 7,5 Hp, 1500Rpm Ratio 1:50 with a helical gear

Gear motor with 7,5 Hp, 1500Rpm Ratio 1:50 with a helical gear

Looking forward to hearing from you.Good day!How are you?
This is Cherry from NER GROUP.Glad to get your inquiry.
And we can supply the vibrator motors,here is our website of vibrator motors:https://www.sogears.com/vibration-motor,please kindly check.
And please tell me the power of vibrator motor you need.
Thanks.
Looking forward to hearing from you.
Good morning ma’am/sir,
-Do you have a vibrator motor that can vibrate a 2.5kg tray?
-how about the casing or holder of the vibrator? Do you have stocks or can you fabricate?
-how about the remote control for your vibration motors? Or timer for start and stop?
-I am searching for a supplier of motor for our project.
Thanks for your response
Good day!How are you recently?
Had you received our quotation for cycloidal gearboxes?
If not,I'll send it to you again.


Thanks.
Waitting for your reply.Good afternoon.How are you recently?
Had you received our quotation for this motor?
And is there any progress?
Thanks.
Looking forward to hearing from you.
Good afternoon.Hope you are doing well!
Have you checked the output shaft diameter of your old gearbox?
Thanks.
Waitting for your reply.
Please fill the attachment to complete the technical study of your Offer Date: 2020/02/28
Note that data as following:
- Working conditions is Dusty.
- Ambient temperature is ( 30 - 50 ) C O
- load type is rotation the kiln 1000 ton.
- working is very little.
- speed input gearbox is around 1400 rpm.
- Working time is variable ( ie sometimes during one month without working and sometimes during one day maximum working one hour because this required gearbox for maintenance ).
Good afternoon!

Gear motor with 7,5 Hp, 1500Rpm Ratio 1:50 with a helical gear

Thank you for your reply.
And please find our updated quotation and drawing attached.
Should you have any other questions,please feel free to contact me.
Thanks.
Your early reply will be highly appreciated.
Good morning!
Hope you are doing well!
Do you still need the 90VDC motors?
Thanks.
Waitting for your reply.
Good morning!Hope everything with you!
I had asked our production manager about your motor status.
The goods are still ongoing now,we received your payment about two weeks ago(on Feb.13th),that means it has been about two weeks since we started to manufacture the gear motor.And it will still need about one week to finish the gear motor's production.
And once the goo
Esta es Cherry de NER GROUP. Me alegra recibir su consulta.
Y encuentre nuestra lista de precios adjunta para extractores de polvo.
Gracias
Esperamos escuchar de usted.
ds are finished,I'll let you know.
Thanks.
Have a nice day!
This is Cherry from NER GROUP.Glad to get your inquiry.
And please find our pricelist attached for dust extractors.
Thanks.


Looking forward to hearing from you.
Good day!This is Cherry from NER GROUP.Glad to get your inquiry.
1. please find our quotation and drawing attached for gearbox and spare parts.
2.The price I quote you inculdes 5% L/C handling cost and your 21% commission.
And this Commission will be paid to you when we receive 100% payment.
And items 3-7 you requested ,they are shown in our quotation,please kindly check.
About Warranty/Guarantee certificate,after client place the order,we could supply it to you.
Should you have any further questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
This is Cherry from NER GROUP.Thank you for your inquiry.
And I had sent you our quotation by my last email,please kindly check.
If you don't receive it,please let me know.Then I will send it to you again.
Thanks.
Waitting for your reply.
This is Cherry from NER GROUP.Glad to get your inquiry.
And please find our quotation attached for helical gear motors.
Should you have any further questions,please feel free to contact me.
Thanks.
Your early reply will be highly appreciated.
Good morning!Hope you are doing well!
I had communicated with our manager today.
Although the price of gearboxes has risen,we would like to start friendly business relationship with you,thus,our manager agree that we could supply the gearboxes for you at the price shown in our previous quotation.And we had offered you a special discountof 5% before,and keep our price as low as possible without sacrificing the quality.And the bearing we use is NSK brand's,the sealing is NOK brand's,and our warranty period is 2 years.
Moreover,the manufacture time of the gearbox is about 80 days.
Should you have any futher questions,please feel free to contact me.
Thanks.
Waitting for your reply.
Have a nice day!
The attachment is a quotation for both boards, please check!

Note: The file is been protected by Excel Online, logging with your current email This email address is being protected from spambots. You need JavaScript enabled to view it. and Password to view the attached file.
I am Mr Theara Chhoy and a personal Accountant Director with Foreign Trade Bank of Cambodia (FTB).
it is with good spirit of heart i opened up this great opportunity to you. A deceased client of mine that shares almost the same name as yours died as a result of heart-related condition on march 2005.His heart condition was duo to the death of the members of his family in the tsunami disaster on the 26 December 2004 in Sumatra Indonesia where they all lost their lives.

There is a draft account opened in my bank in 1999 by a long-time client our bank,a national of your country.he was a CEO/a textile company owner,business man,a miner at kruger mining company here in Cambodia. he was a geologist and consultant to several other mining conglomerates operating in Cambodia,China,Taiwan,Japan,Indonesia,Pakistan,Vietnam all in Asia,before he passed away on 12th march 2005 leaving nobody as the next of kin of his account after his death.

The amount in this account is currently $32,640.000.00 (Thirty Two million, Six Hundred And Fourty Thousand United States dollars) .I want to present you as a beneficiary,I will use my position and influence in our bank to make them release this money to you for us to share.

Kindly get back to me for more details via email address:

Good afternoon.Glad to receive you email.
So sorry,the price shown in our quotation had been invalid,and it has been half a year since I sent you this offer.
However,our offer's valid time is 30 days that is shown in our quotation.

Gear motor with 7,5 Hp, 1500Rpm Ratio 1:50 with a helical gear

Moreover,the price of the gear box raw material is rising rapidly, which leads to the increase of our production cost, thus the price of the gear box has to rise.

About the discount,so sorry,I am afraid that there will no discount again about this quotation.Because on the hand,we offered you a 5% discount before(15800*0.95=15010USD) ,please kindly check the following email.On the other hand,as I said above,the price of gearbox had been risen.Hope you could understand.

But for our long-term friendly cooperation relationship in future,I will communicate with our manager to ask if we still can manufcture the gearboxes for you at the price shown in the quotation.Hello Cherry,

Hope you are doing well.

Please advise if your offer still valid and please provide us with discount and the final lead time.

Waiting your discount Good evening!
This is Cherry from NER GROUP.Glad to get your inquiry.
And please find our quotation attached for vibrator motors.
Should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
Hello, I am looking for 2 types of gear motor:
1. Gear motor with 7,5 Hp, 1500Rpm Ratio 1:50 with a helical gear (5 units)
2. Gear motor with 3 Hp,1500Rpm Ratio 1:50 with a helical gear (6 units)

Can you provide the prices for each unit FOB Shanghai, the product performance chart and pictures.
PLEASE QUOTE LOWEST PRICE.

FLENDER GEAR MOTOR FDAZ88-M90L4R-L16NHA
VOLTAGE 220-240V, FREQ 50HZ, POWER 1.5KW, 380-420V, 87HZ, 26KW, IP55,
QTY:2

Gear motor with 7,5 Hp, 1500Rpm Ratio 1:50 with a helical gear

PLEASE ADVICE LEAD TIME AND WEIGHT. PLEASE SEND US DATA-SHEET.
We would like to conclude this requirement with the following terms and requested to provide details with acceptance to finalize on urgent basis.
1) Custom duty and processing charges in China to your account and in India to Jindal account.
2) Packing charges - Nil.
3) Delivery – Within 1-2 Week.
4) Payment – Against delivery , After receipt of material at our site.
5) Banking charges (Wire Transfer fee) – Nil
6) Pls confirm discount - ?
Following documents are required along with Material. The same shall be send once the material is lifted from your work for further custom clearance at Indian port.
1) Invoice
2) Packing list
3) Bill of Lading
4) Test Certificate
5) Certificate of Origin
7) Warranty Certificate against manufacturing defect for 12 months.
8) Description on invoice must be paste on product and on packaging for smooth custom clearance.
Please note our customer informed us that they have sent the name plate to some other traders and have received the quotation just based on the name plate.
So one more time speak with your SEW supplier and inform them we just have the name please. And see if they can quote based on it.Good day!This is Cherry from NER GROUP.Glad to get your inquiry.
And please find our quotation attached for 2.2KW ABB motor you need.
Should you have any further questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
Have a nice day!
Good day!Thank you for your reply.
Yes,you sent me the nameplate and details of gearbox you need.
But nameplate only shows the gearbox parameters,not showing whether the gearbox is with back stop or not.
Generally we send quotations to clients according to the products shown in the "major equipment".
And because the backstop is not shown in the the item "MAJOR EQUIPMENT" in your inquiry, I had not quoted you the price of the backstop.
Sorry for bringing you invonvinience.
Thank you for your response.
I had sent our quotation to you by my last email just now,please kindly check.
If you don't receive it,please let me know.Then I'll send it to you again.
Thanks.

Gear motor with 7,5 Hp, 1500Rpm Ratio 1:50 with a helical gear

Waitting for your reply.
Good day!Thank you for your reply.
Enclosed is our quotation for gearbox,please kindly check.
Should you have any further questions,please feel free to contact me.
Thanks.
Your early reply will be highly appreciated.
This is unacceptable.
I gave you details and name plate picture for confirmation.
Is it that the details didn't specify BACK STOP or what?
We await your response.
Thank you for your swift reply.
And enclosed are our quotation and drawing for gearbox you need,please kindly check.
Should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.

After discussed with engineer, then we would like to know for reducer as attached.
Looking forward to hear from you.
This is Cherry from NER GROUP.Glad to get your inquiry.
And please find our quotation attached for 5.5KW gear motor and gearbox.
Moreover,here attached is a picture of our gear motor used for other client's hoist project for your reference.

Should you have any further questions,please feel free to contact me.
Thanks.
Your early reply will be highly appreciated.
Thank you very much for your gearbox drawings, please provide us with your quotation, thanks in advance.
Good day,
We are looking for 2 kinds of Speed reducer as follows :
1. Main Reducer:
Ratio: i=121.1
Actual motor power 5.5 KW (Siemens Motor)
Motor rpm : 960 rpm
Safety Factor 1.5

2. Second Reducer
Ratio: 5.82
The output speed is 960/5.82 = 165rpm)
Power 5.5kW
Safety Factor 1.5
The Output Torque : 477.4Nm

There are 2 Reducer : Main and second reducer. The main requirement is the actual motor power will be 5.5 KW. That is the actual power.
While the output speed and torque calculation based on 1.5 safety factor. The speed reducer will be use on Hoist.

 Geared Motors And Electric Motor Manufacturer

The best service from our transmission drive expert to your inbox directly.

Get in Touch

Yantai Bonway Manufacturer Co.ltd

ANo.160 Changjiang Road, Yantai, Shandong, China(264006)

T+86 535 6330966

W+86 185 63806647

© 2024 Sogears. All Rights Reserved.