Yantai Bonway Manufacturer

high speed gearbox manufacturers

Good morning!
Our quotation of 30KW motor you might have received and considered.
Could you kindly advise your comments at your earliest convenience?
Thanks.
Looking forward to hearing from you.

Good morning！
Glad to receive your inquiry.
Could you send me a picture of motor you need?
Thanks.
Looking forward to hearing from you.

We need electric tubular motors for our machine, which can operate continuously for example 10 to 20 min.
I saw your product line.
By the way, this should be the same or similar form of the engine as used to lift the door.
In the center is an open part for mounting on a pipe of diameter from 40 to 80 mm.
We need the speed of moving the conveyor belt - 1m aproximetly in 3", with integrated frequence regulation..
The engine must allow the movement of the conveyor belt, which is loaded from 300 to 1200 kg cargo.
Please send me a catalog of these engines OR if you can make construction of that model.
If I can contact the project manager would be the most appropriate
Thank you in advance.
Best regards.

Good evening!
Enclosed is our spare parts list of ZLYJ225 gearbox,please kindly check.
And please tell me which parts you need,then I'll send you our best price.
Thanks.
Looking forward to hearing from you.
Have a nice day~

high speed gearbox manufacturers

Thank you for your quick reply.
Our engineer is studying the motor you need.
When I get his news,I'll let you know.
Thanks.
Have a nice day!

Good evening!I am fine.Thanks.
The Ex-work price of ZLYJ225 gearbox's parts are as follows:
1.Tapered Roller Bearing: 95USD per unit.
2.Tapered Roller Bearing: 95USD per unit.
3.Oil Seal: 88USD per unit.
4.Tapered Roller Bearing: 95USD per unit.
5.Spherical Roller bearing: 93USD per unit.
6.Oil Seal: 88USD per unit.
7.Spherical Roller bearing: 93USD per unit.
8.Thrust Spherical Roller bearing: 97USD per unit.
9.Oil Seal: 88 USD per unit.
Should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.

Good morning!
Our quotation of VF44 worm gearbox you might have received and considered.
Could you kindly advise your comments at your earliest convenience?
Thanks.
Looking forward to hearing from you.

Good evening!
How are you?
Our quotation for motorgearboxes you might have received and considered.
Could you kindly advise your comments at your earliest convenience?
Thanks.
Looking forward to hearing from you.

high speed gearbox manufacturers

Good day.
Our customer has not completed to check dimensions required for your drawing BLD3.5. He is worried about the result in spite of checking the dimensions.
Accordingly, first, we need to try easier solution. I think that you need to study which parts are required to repair the old broken gearbox BLD3-43-4. Please see attached photos the old broken gearbox.
We bought some parts from you and repaired the old gearbox successfully in November 2018. The machine was running for 3 months properly after replaced with some parts as follows:
1. Cycloidal gear for BLD3-43-4 : OD 208, ID 86.54, T16, 10 holes (D30.15)-43 theeth : 2ea
2. Roller bearing RN309E : 2ea
3. Space ring OD90 : 1ea
4. Shaft ring OD45 :
​
Please study the following photos for the old broken gearbox which parts you will be able to supply, in order to repair the old broken gearbox.
​
I look forward to hearing from you.

Good afternoon.
Our technical department has already studied, we will send you a BLD3.5 gear head instead of spare parts because we worry about the part's installation after you receive them.
And here attached is the gear head's drawing our technical department sent me,please confirm the dimensions.
Thanks.
Should you have any other questions,please tell me.
Thanks.
Looking forward to your reply.

Good afetrnoon.
Our technical department have studied the photos showing the broken old gearbox and get conclusion,these parts need to be changed,as follows:
1.Eccentric bearing
2.locating bearing
3.space ring
4.Pin sleeve
5.shaft sleeve
Please you also confirm them.
Thanks.
Looking forward to hearing from you.

high speed gearbox manufacturers

My design is only my opinion - version.
Consult your engineers.
The assembly must be designed so that the gearbox is connected with the tube , so the force wil transmitted to the axle which rotates.
Tube serves as a driving axle and is rotated by the gearbox and gear selection revolutions via a frequency regulation.
Also, moving of the conveyor belt by 1 meter in 3 seconds. The rest will be regulated by ourselves.
Br
Danijel

Good day!
Sure,the quantity and EX-work unit price are as follows:
1.Eccentric bearing: 2PCS, 30USD/PCS
2.locating bearing: 2PCS, 30USD/PCS
3.spacer ring: 1PCS, 30USD/PCS
4.Pin sleeve: 10 sets, Total 65USD (for 10 sets)
No,the required quantity of pin sleeve is 10pcs,not 14pcs.
Should you have any other questions,please tell me.
Thanks.
Looking forward to hearing from you.

Good day!
Thank you for your information.
Our technical department will study which parts are required to repair the old broken gearbox BLD3-43-4 and then we will send these spare parts to you,which will be a compensation for you.We won't design a new gear head, the after-sales of this gearbox is completed.Hope you could understand.
Thanks.
Waitting for your reply.