English English
integral geared compressor gear

integral geared compressor gear

integral geared compressor gear 

Good day.
After designing completion before manufacturing, I need to confirm by our customer if your designed drawing is matched with the motor and auger shaft/ housing.

Please send your designed drawing before starting manufacturing.

Our customer is getting lots of loss because machine is not running. Our customer's relations and trust accumulated since 1998 are breaking.

My design is only my opinion - version.
Consult your engineers.
The assembly must be designed so that the gearbox is connected with the tube , so the force wil transmitted to the axle which rotates.
Tube serves as a driving axle and is rotated by the gearbox and gear selection revolutions via a frequency regulation.
Also, moving of the conveyor belt by 1 meter in 3 seconds. The rest will be regulated by ourselves.
Br
Danijel

Thank you for your quick reply.
1.I belive in our technical department and our engineer,if you are worried,we can supply a new gear head as we planed before.
2.As I told you before,the model of the cycloid gear motor is corresponding to the type of the spare parts. If the model of the reducer is determined, the spare part's is also determined.And we know your old gear head's model,thus,also know these part's size.
3.Generally, within three or four days after you make the confirmation, the parts can be sent to you.
4.The total grass weight is about 30KGS.
And the SF express cost are as follows:
If the good will be sent by SF International Special Offer,it will take 4-6 days to arrive at there,and the cost is 142USD.
If the good will be sent by SF International standard express,it will take 1-3 days to arrive at there,and the cost is 214USD.
Thanks.

integral geared compressor gear

integral geared compressor gear 

Good day!
Thank you for your information.
Our technical department will study which parts are required to repair the old broken gearbox BLD3-43-4 and then we will send these spare parts to you,which will be a compensation for you.We won't design a new gear head, the after-sales of this gearbox is completed.Hope you could understand.
Thanks.
Waitting for your reply.

Good day.
Our customer has not completed to check dimensions required for your drawing BLD3.5. He is worried about the result in spite of checking the dimensions.
Accordingly, first, we need to try easier solution. I think that you need to study which parts are required to repair the old broken gearbox BLD3-43-4. Please see attached photos the old broken gearbox.
We bought some parts from you and repaired the old gearbox successfully in November 2018. The machine was running for 3 months properly after replaced with some parts as follows:
1. Cycloidal gear for BLD3-43-4 : OD 208, ID 86.54, T16, 10 holes (D30.15)-43 theeth : 2ea
2. Roller bearing RN309E : 2ea
3. Space ring OD90 : 1ea
4. Shaft ring OD45 :

Please study the following photos for the old broken gearbox which parts you will be able to supply, in order to repair the old broken gearbox.

I look forward to hearing from you.

Good afternoon.
Our technical department has already studied, we will send you a BLD3.5 gear head instead of spare parts because we worry about the part's installation after you receive them.
And here attached is the gear head's drawing our technical department sent me,please confirm the dimensions.
Thanks.
Should you have any other questions,please tell me.
Thanks.
Looking forward to your reply.

integral geared compressor gear

integral geared compressor gear

Good afetrnoon.
Our technical department have studied the photos showing the broken old gearbox and get conclusion,these parts need to be changed,as follows:
1.Eccentric bearing
2.locating bearing
3.space ring
4.Pin sleeve
5.shaft sleeve
Please you also confirm them.
Thanks.
Looking forward to hearing from you.

Thank you for your quick reply.
Okay.We agree with you.

Okay.I see.Our technical department will carefully study which exact parts are required to repair the broken old gearbox on the basis of the attached photos showing the broken old gearbox.

Okay.After studying,I'll let you know the required parts list and costs firstly.
Thanks.

Good day.
Thanks for your opinion.
If the broken old gearbox will be repaired successfully by the parts you will supply, you will not need to compensate a new designed gearbox in terms of this claim. However, if the parts will not be repaired by the parts, you will need to supply a new designed gearbox. In this case, we will pay cost of the parts supplied by you in spite of failure. Do you agree our suggestion ?

The important thing is that you must carefully study which exact parts are required to repair the broken old gearbox on the basis of the attached photos showing the broken old gearbox.

After studying, first please let me know required parts list and costs.

 integral geared compressor gear

integral geared compressor gear 

Thanks for the photos for part names.
Can you indicate each quantity ?
Required quantity of pin sleeve shown in the photo is 14 pcs ?

Please let me know each price.

Best regards,
Henry

Thank you for your quick response.
So sorry,I make a mistake,item 4 and item 5 are the same parts(item 5 is another name for item 4),that is to there are four spare parts need to be replaced totally,as follows:
1.Eccentric bearing
2.locating bearing
3.spacer ring
4.Pin sleeve(shaft sleeve)
And enclosed are these part's photos,please kindly check.
If you have any other questions,please feel free to contact me.
Sorry again.
Looking forward to hearing from you.

integral geared compressor gear

 Geared Motors And Electric Motor Manufacturer

The best service from our transmission drive expert to your inbox directly.

Get in Touch

Yantai Bonway Manufacturer Co.ltd

ANo.160 Changjiang Road, Yantai, Shandong, China(264006)

T+86 535 6330966

W+86 185 63806647

© 2024 Sogears. All Rights Reserved.