Motor explosion proof is a special motor
The actual explosion-proof motor flameproof motor, it is different from the ordinary motor structure environment, gas and dust can prevent the external motor into the motor structure, or even enter, can short-circuit fire occurs in the inside, not the flame out of a combustible gas and dust ignition exist outside the surrounding environment the.
Is widely used for explosion-proof motor, a combustible gas and dust, in case of fire or burning objects can overheat and explosion in the environment, such as coal, machinery and paint warehouse workshop, mills, transportation and storage of flammable gas and liquid (such as oil tanker, oil and gas transport system, gas station and gas station etc.) the presence of combustible gases (such as ammonia chemical workshop production workshop).
Explosion proof electric motor production in southern anhui:
YB3 series explosion-proof three-phase asynchronous motor is a new type of motor which is designed according to the 3 energy efficiency standard of GB19613-2012 on the basis of YB2 explosion-proof motor. Mine is suitable for containing gases such as methane or coal dust (non working face (Exd) and I (Exd II AT4) plant and dIIBT4), and II A, B containing T1~T4 group of combustible gas or steam and air to form explosive mixture of places.
Ultra high performance YBX3 series flameproof three-phase asynchronous motor is of flameproof motor vibration model research based on YB3 explosion-proof motor on the new motor specification design is completed in accordance with the 2 energy efficiency standards in GB19613-2012. Mine is suitable for containing gases such as methane or coal dust (non working face (Exd) and I (Exd II AT4) plant and dIIBT4), and II A, B containing T1~T4 group of combustible gas or steam and air to form explosive mixture of places. YBF2 series of fan with explosion-proof three-phase asynchronous motor .Motor explosion proof is a special motor.Flameproof three-phase asynchronous motor is a special motor according to the design characteristics of axial fan with the fan of YBF2 series, and according to the particularity of the wind turbine, a special design on the bearing structure of motor and transformer.
YFB2 series of dust explosion-proof three-phase asynchronous motor is used in the combustible dust environment of the product. Applicable to the factory in the 10 areas of explosive dust (fiber) 11 District dangerous occasions. The temperature group is a group of T1-T4, but it is not suitable for occasions such as gunpowder and explosives, and it is not suitable for the explosive dangerous occasions of combustible gas and combustible dust. YBK2 series of coal mine underground explosion proof type three-phase asynchronous motor Flameproof three-phase asynchronous motor used in coal mine areas containing methane and coal dust in coal mine YBK2.
YBS series scraper conveyor with explosion-proof three-phase asynchronous motor Flameproof three-phase asynchronous motor is suitable for driving mine scraper conveyor, belt conveyor, scraper loader and other coal mine machinery with YBS series scraper conveyor has the characteristics of frequent starting, overload ability, good protective performance etc.Brief Introduction of Explosion-proof Three-phase Induction Motor YB2 series:
According to the requirements of < Electrical Apparatus for Explosive Gas Atmosphere Part 1: General Request> and< Electrical Apparatus for Explosive Gas Atmosphere Part 2: Flameproof Enclosure ‘D’> of GB3836.1-2000, this explosion-proof three-phase induction motor YB2 series can be made into flameproof motors. Furthermore, this series of explosion-proof motors has also passed ATEX certifications (only for EExd BT4), and also complied with the Essential Health and Safety Requirements of CENELEC EN 60079-0:2004 and CENELEC EN 60079-1:2004)
Applications of Explosion-proof Three-phase Induction Motor YB2 series:
1)EExd I: This explosion-proof motor we made in China can be used in the underground coal mines where the explosive mixture such as methane or dust exists.
2)EExd II BT4: This explosion-proof motor is suitable for sites where the hazardous environment is classified into II Group, B Class, and Temperature T1-T4.
The motors can be customized according to the customers need with different Voltage,Frequency ,etc.
Raw Material:Silicon Steel for Rotor and Stator Steel for Shaft Iron or Aluminum Cover Copper or Aluminum enameled wire
Performance: Smooth running, High efficiency, Low noise, Steady performance. We can make the wire inside of motor are: Copper wire, aluminum wire and copper wire mix aluminum wire. The wire is according to your request!
5.Why choose us
1) Safe and reliable, low noise, good starting, long life, etc.
2) Our products pass the CE/CCC/ ISO9001/TUV/BV/ IEI/ROHS
3) The motor can be designed and produced according to your request.
4) We will send you some samples for your further inspecting.
5) We have more detailed specifications.If you are interested in, please mail us.
Permanent magnet synchronous motor is widely used in petroleum, chemical, electric power, transportation, textile, industrial and mining enterprises and electric vehicles, drag pumping units, elevators, fans, pumps, compressors, belt machines, machine tools and other machinery.
What are the characteristics of TYPX frequency conversion permanent magnet synchronous motor?
1, the series of products with frequency control capacity, in the 25% to 120% load range, relative to the same specifications of asynchronous motors are more efficient, wide range of economic operation, with each other has the energy saving effect. The motor temperature is low, under the rated load, the motor temperature rise in the 30-50K
2, energy efficient: compared with the asynchronous frequency control motor, energy efficient. Compared with the specifications, the series of motor efficiency than the asynchronous inverter motor efficiency of 3 to 10 percentage points. To 1.5kW, for example, the efficiency difference between the two nearly 7 percentage points;
3, can be precise speed: compared with the asynchronous frequency conversion system, no encoder can be accurate speed control;
4, high power factor: can reduce the consumption of reactive energy, but also reduce the capacity of the transformer.
TYPX frequency conversion permanent magnet synchronous motor installation parameters
3.2.1 Ambient air temperature varies with the seasons, but does not exceed 40 ° C.
3.2.3 Ambient air maximum relative humidity of not more than 95% (when the temperature is 25 ℃).
3.2.4 rated voltage of 380V, 660V, 1140V, 380V / 660V, 660 / 1140V.
3.2.5 Rated frequency is 50Hz. FM range: 5Hz-50 Hz, 50 Hz -100 Hz, 5 Hz -100 Hz (depending on customer requirements). The variable frequency speed control of the squirrel-cage winding is suitable for the inverter starting (the variable frequency converter is recommended). Self-starting frequency conversion synchronous motor for 50HZ sinusoidal power supply and inverter for power.
3.2.6 The motor quota is a continuous quota based on the continuous working system (S1), allowing full pressure to start.
3.2.7 motor with F-class insulation, the stator winding temperature rise (resistance method) by 80K assessment (which frame seat 315L 2,4 and the frame number 355, allowing 105K assessment).
The series of motors for coal mine drive scraper conveyor, belt conveyor, transfer machines and other mechanical equipment.
Conveyor with explosion-proof three-phase asynchronous motor (conveyor with explosion-proof motor), the explosion-proof safety performance in line with GB3836.1-2010 "Explosive gas environment with electrical equipment Part 1: General requirements" and GB3836.2-2010 "Explosive Electrical equipment for gas atmospheres Part 2: Explosion-proof type "d" "is a special motor that is capable of driving a coal mine underground mining face with a flexible scraper conveyor, belt conveyor or other equipment.
Performance characteristics
1, this series of motor steel plate welding machine seat, strong and beautiful cooling effect, with frequent start, overload capacity, good protection and other characteristics.
2, in the technical use of special design, performance, starting torque, overload capacity, especially suitable for driving all kinds of underground transport aircraft.
3, the motor base are made of QT450 ductile iron cast, end cover, internal file junction box, wiring cover with HT250 cast iron casting, with high mechanical strength.
Quality assurance
1, this series of motors using F-class insulation, protection class IP55, to take their own cooling, continuous operation. The vibrating motor allows full pressure to start directly.
2, the implementation of national industry standards, explosion-proof performance according to GB3836.1-2000 / GB3836.2-2000 regulations, made of explosion-proof, explosion-proof mark for the "Exd Ⅰ".
3, the product by the national explosion-proof electrical product quality supervision and inspection center inspection, to ensure product safety and reliability, a mine product safety signs certificate, the national industrial production permit, explosion proof certificate, can be assured to buy.
YBS series of conveyor with explosion - proof power condition
YBS series of conveyor with explosion-proof motor other parameters
1) The main body of the motor protection class IP44, junction box protection class IP54.
2) The cooling mode of the motor is IC411.
3) The structure and installation of the motor are IMB3, IMB5, IMB10.
4) The rated working mode of the motor is S1.
5) The rated power of the motor is 50Hz.
6) The rated voltage of the motor is 380V / 660V, 660V / 1140V.
7) The insulation rating of the motor is Class F.
YBS series of conveyor with explosion - proof motor application equipment
Coal scraper conveyor, belt conveyor, transfer machine, crusher.
YBS series of conveyor with explosion - proof motor installation and dimensions
YBF2 (Block No. 80 ~ 355) series of coal mine blower with flameproof three-phase asynchronous motor (hereinafter referred to as: motor), is based on methane or coal dust containing coal shaft axial fan main features designed specifically Motor, and according to the particularity of the fan, the motor bearing structure and outlet mode for special design.
Explosion-proof performance of electric motors GB3836.1-2010 "Explosive atmospheres Part 1: General requirements for equipment", GB3836.2-2010 "Explosive atmospheres Part 2: Equipment protected by flameproof enclosure" d ", GB3836.3- 2010 "Explosive atmospheres Part 3: Equipment protected by increased safety" e ", MT451-1995 General technical specification for safety performance of explosion-proof low voltage three phase asynchronous motors for coal mines". Motor explosion proof is a special motor.Electrical performance of the implementation of Q / NY-008-2015 "YBF2 series of coal mine blower with three-phase asynchronous motor technical conditions (frame number 80 ~ 355)" requirements, explosion-proof mark for the ExdI, suitable for coal mining face with Methane flammable gas or coal dust and air to form an explosive gas environment.
YBF2 series fan explosion-proof motor YBF2 series fan explosion-proof motor Products YBF2 series fan explosion-proof motor model meaning YBF2 series fan explosion-proof motor working environment YBF2 series fan explosion-proof motor technical parameters YBF2 series fan with flameproof three-phase asynchronous motor explosion-proof motor
YBF2 series fan with flameproof three-phase asynchronous motor is designed for supporting flameproof ventilator and can also be used as BT35-11 series explosion-proof axial fan supporting special motor, electrical performance, rated power and so on with YB2 motor the same.
This series of motor explosion-proof performance in line with GB3836.1-2010 "Explosive Environment Part 1: General requirements" and GB3836.2-2010 "Explosive environment Part 2: Flameproof enclosure" d "protected equipment" standard, Respectively, made of flameproof Exd Ⅰ, E xd Ⅱ BT4.
YBF2 series fan with flameproof three-phase asynchronous motor is to drive coal mine non-mining face fan power equipment. Explosion-proof mark for the EXDI, suitable for coal mine non-mining surface with methane flammable gas or coal and air to form an explosive gas environment.
YBF2 series fan explosion - proof motor products
YBF2 series fan with flameproof three-phase asynchronous motor is to drive coal mine non-mining face fan power equipment. Explosion-proof mark for the EXDI, suitable for coal mine non-mining surface with methane flammable gas or coal and air to form an explosive gas environment.
YBF2 series fan explosion - proof motor model significance
YBF2 series fan explosion - proof motor working environment
1 ambient air temperature changes with the season, generally not more than -15- +35 ℃
2 ambient atmospheric pressure 80-110Kpa
3 no more than 1000m above sea level
4 ambient air maximum relative humidity of not more than 95% (when the temperature is +25 ℃)
5 in the presence of methane and other explosive performance hazard
TYBPE (X) frequency control explosion-proof permanent magnet motor Overview:
TYBPE (X) series of frequency control ultra-high efficiency flameproof three-phase permanent magnet synchronous motor, the series of efficiency indicators in line with GB30253-2013 "permanent magnet synchronous motor energy efficiency rating and energy efficiency rating" of the first standard.
TYBPE (X) frequency control explosion-proof permanent magnet motor Features:
TYBPEX frequency control permanent magnet synchronous motor is fully enclosed, since the fan cooling structure. Its installation size and YBBP series explosion-proof motor the same, the series of products with frequency control capacity, in the 25% to 120% load range, relative to the same specifications asynchronous motor are more efficient, wide economic range, with significant Of the energy-saving effect, the motor temperature is low, under the rated load, the motor temperature rise in the 30-50k.
TYBPE (X) frequency control explosion-proof permanent magnet motor Model:
TYBPEX frequency control explosion-proof permanent magnet motor motor model meaning: T for synchronization; Y on behalf of permanent magnet; B on behalf of the explosion: Px on behalf of efficient frequency. Combined with the frequency conversion is ultra-high efficiency permanent magnet synchronous motor.
TYBPE (X) frequency control explosion-proof permanent magnet motor application range and performance:
The series of products are widely used in petrochemical, coal, electricity, transportation, textile, industrial and mining enterprises and explosion-proof locomotives, drag fans, pumps, compressors, pulleys, machine tools and other machinery. Variable frequency permanent magnet synchronous motor from the three-phase 50 Hz power supply operation, with soft start capability.
TYBPE (X) frequency control explosion-proof permanent magnet motor basic parameters:
When ordering, specify the motor model, the number of poles, the rated power, the rated voltage, the rated frequency, the installation structure type, the degree of protection, the environmental requirements.
4.2.1 Ambient air temperature varies with seasons, but does not exceed 40 ° C.
4.2.2 altitude of not more than 1000m.
4.2.3 Ambient air maximum relative humidity of not more than 95% (when the temperature is 25 ℃).
4.2.4 rated voltage of 380V, 660V, 1140V, 380V / 660V, 660 / 1140V.
4.2.5 Rated frequency is 50Hz. FM range: 5Hz-50 Hz, 50 Hz -100 Hz, 5 Hz -100 Hz (depending on customer requirements). No-squirrel-cage windings of the explosion-proof frequency control permanent magnet synchronous motor for the inverter to start (recommended the use of loss-type inverter). Self-starting frequency conversion synchronous motor for 50HZ sinusoidal power supply and inverter for power.
4.2.6 The motor quota is a continuous quota based on the continuous working system (S1), allowing full pressure start.
4.2.7 motor with F-class insulation, the stator winding temperature rise (resistance method) by 80K assessment (which frame size 315L 2,4 and the frame number 355, allowing 105K assessment).
5 product selection guide
1. Explosion-proof type: Exd1Mb suitable for coal mines
2. Explosion-proof type: Exd11Bt4 Gb. Applicable to places where the plant has a natural gas (propane ethylene) 3. Explosion-proof type: Exd11Ct4 Gb Suitable for places where the plant has a natural gas (hydrogen.
4. Explosion-proof type: ExtdB21 Db Applicable to the factory with flammable dust places and flammable Fei Xu places (such as feed. Textile. Flour. Cement and other places where dust)
5. Explosion-proof type: Exd11Ct4 Gb / ExtdB21 Db is suitable for factories with flammable gas sites, but also meet the flammable dust sites and flammable Fei Xu places (such as feed. Textile. Flour. Cement can produce dust sites).
The junction box is one of the electrical accessories, because the electrical lines in the wire is through the pipe or take the cable bridge, and in the wire joint parts (such as the line is longer, or wire to the corner) on the use of junction box as a transition, Wire tube and junction box connected to the wire inside the wire in the junction box together, play a protective wire and the role of connecting the wire, this is the junction box.
In the home decoration, the junction box is one of the electrical accessories, because the decoration of the wire is through the wire, and in the wire joint parts (such as the line is longer, or wire to the corner) on the use of junction box as a transition With the wire tube and the junction box connected to the wire inside the wire in the junction box together, play a protective wire and the role of connecting the wire, this is the junction box.
Explosion-proof junction box Scope: 1.1 District, Zone 2 Explosive gas environment.
2.20 area, 21 area, 22 area flammable dust environment.
3. Applicable to IIA, IIB, IIC-class explosive environment
4. Applicable to the temperature group T1-T6 environment.
Explosion-proof junction box Features: 1. Cast aluminum alloy shell, the surface spray, beautiful appearance. Explosion-proof series of anti-corrosion glass fiber reinforced unsaturated resin resin molding shell. Or stainless steel welding molding.
2. Open the lid, just loosen the bolt 1/3, and then turn the clockwise rotation of 10 ° can be opened, you can play the bolt is not lost, and the effect of quick opening cover.
3. There are a variety of ways and specifications.
4. Access thread can be special thread.
5. Steel pipe or cable wiring.
6. Explosion-proof junction box in line with GB3836-2000, IEC60079, GB12476.1-2000, IEC61241 standard requirements.
YBK3 explosion-proof motor for coal mine (for mining below), the motor explosion-proof structure for the ExdI Mb. Explosion-proof mark for ExdI Mb for coal or coal dust containing coal mining face. This series of motors for the squirrel cage explosion-proof three-phase asynchronous motor, enclosure protection class IP55, cooling method for the IC411 fully enclosed fan cooling. The structure and installation of the motor are IMB3, IMB5, IMB35. Motor explosion proof is a special motor.YBK3 explosion-proof motor is a special motor designed for coal mine mining face machinery. The seat is formed by steel plate welding, windshield, junction box and insulation structure. It is mainly used for the harsh working environment of coal mine.
Altitude of not more than 1000 meters, the ambient air temperature: the ambient air minimum -15 ℃, up to 35 ℃ coal mine mining face, the ambient air maximum relative humidity of not more than 95% (when the temperature is 25 ℃)
YBK3 explosion - proof motor structure and installation
The explosion-proof structure of YBK3 explosion-proof motor is ExdI Mb.
YBK3 explosion-proof motor of the main shell protection class IP55
YBK3 explosion-proof motor cooling method for the IC410, IC411
YBK3 explosion-proof motor insulation class for the F-class, stator winding temperature rise margin, long life.
YBK3 explosion-proof motor has a cylindrical shaft extension, by coupling or spur gear drive.
YBK3 explosion-proof motor rotor with cast aluminum structure. Rotor through the dynamic balance detection, YBK3 explosion-proof motor running smoothly, small vibration, low noise.
YBK3 explosion-proof motor set, the rotor punch with high permeability, low loss of high quality electrical silicon steel, YBK3 explosion-proof motor loss is low, high efficiency.
YBK3 explosion-proof motor stator windings using high-strength polyester enamelled round copper wire, and by VPI vacuum pressure impregnation treatment, as a complete whole, winding insulation has a good electrical, mechanical, moisture and thermal stability.
YBK3 explosion-proof motor bearings with YBK3 explosion-proof motor for low vibration, low noise bearings, frame number 132 below the double-sided sealed bearings, in the shaft end of the installation of wave spring washers to moderate pressure on the bearing, effectively inhibit the YBK3 explosion-proof motor running The resulting vibration and noise. Frame number 160 above the use of internal and external cover structure, and in the bearing part of the ring ring fixed, effectively prevent the YBK3 explosion-proof motor rotor axial chain.
YBK3 explosion-proof motor fan, windshield material. YBK3 explosion-proof motor with anti-static plastic fan, the inertia of small inertia, low loss, a full range of fans and shaft using key connection, reliable operation. Wind cover for the steel structure, to prevent a certain size of the invasion of foreign objects under the premise of the maximum area of ventilation, so that the air flow.
YBK3 explosion-proof motor has the following three basic structural types: B3 has a base, no direct installation of the flange, B5 without base, with direct mounting flange, B35 has a base, There are direct mounting flanges.
YBK3 explosion-proof motor for coal mine (for mining below), the motor explosion-proof structure for the ExdI Mb. Explosion-proof mark for ExdI Mb for coal or coal dust containing coal mining face. This series of motors for the squirrel cage explosion-proof three-phase asynchronous motor, enclosure protection class IP55, cooling method for the IC411 fully enclosed fan cooling. The structure and installation of the motor are IMB3, IMB5, IMB35. YBK3 explosion-proof motor is a special motor designed for coal mine mining face machinery. The seat is formed by steel plate welding, windshield, junction box and insulation structure. Motor explosion proof is a special motor.It is mainly used for the harsh working environment of coal mine.proof motor set, the rotor punch with high permeability, low loss of high quality electrical silicon steel, YBK3 explosion-proof motor loss is low, high efficiency.
YBK3 explosion-proof motor stator windings using high-strength polyester enamelled round copper wire, and by VPI vacuum pressure impregnation treatment, as a complete whole, winding insulation has a good electrical, mechanical, moisture and thermal stability.
YBK3 explosion-proof motor bearings with YBK3 explosion-proof motor for low vibration, low noise bearings, frame number 132 below the double-sided sealed bearings, in the shaft end of the installation of wave spring washers to moderate pressure on the bearing, effectively inhibit the YBK3 explosion-proof motor running The resulting vibration and noise. Frame number 160 above the use of internal and external cover structure, and in the bearing part of the ring ring fixed, effectively prevent the YBK3 explosion-proof motor rotor axial chain.
YBK3 explosion-proof motor fan, windshield material. YBK3 explosion-proof motor with anti-static plastic fan, the inertia of small inertia, low loss, a full range of fans and shaft using key connection, reliable operation. Wind cover for the steel structure, to prevent a certain size of the invasion of foreign objects under the premise of the maximum area of ventilation, so that the air flow.
YBK3 explosion-proof motor has the following three basic structural types: B3 has a base, no direct installation of the flange, B5 without base, with direct mounting flange, B35 has a base, There are direct mounting flanges.
YBJ series motor is a special motor for driving coal mine underground or ground dispatch winch, base roadway and tractor heavy winch machine. This series of motor cases obey high, beautiful shape, quiet and reliable operation, long life, functional, settled using the convenience of repair and other characteristics.
YBJ winch with explosion-proof motor skills parameters:
YBJ winch with explosion-proof motor use conditions:
(1) altitude does not exceed 1000m.
(2) the situation the temperature of the air with the end of the reform, the general does not catch the -20 ~ +40 ℃.
(3) Condition The maximum relative humidity of the air does not exceed 95% (when the temperature is + 25 ° C)
(4) YBJ explosion-proof motor for coal mine conditions, YJ series of ordinary type, for the non-explosion on the ground.
YBJ winch with explosion-proof motor work methods: S1
No - foot) YBJ Explosion - proof three - phase asynchronous motor for coal mine winch
With the foot) YBJ coal mine winch with flameproof three - phase asynchronous motor
YBJ winch with explosion-proof motor type Meaning:
The working quota is the periodic working quota based on the working system S1, the intermittent working system S3 (40% or 60% load connection Fc) or the adjacent working system (S8 30%, S4 50%).
YBJ explosion-proof motor case parameters
(1) YBJ explosion-proof motor explosion-proof mark for the ExdI.
(2) YBJ explosion-proof motor planning and settlement type IMB3, IMB5, IM9001.
(3) YBJ Explosion-proof motor main body enclosure protection for the IP44 or IP54 or IP55, the junction box for the IP54 or IP55.
(4) YBJ explosion-proof motor cooling method for the IC410, IC411, IC416.
(5) YBJ explosion-proof motor insulation for the F-class or H-class, stator winding temperature rise margin, long life.
(6) YBJ explosion-proof motor with one end of the cylindrical shaft extension, by elastic coupling or spur rolling.
(7) YBJ explosion-proof motor stator windings to receive high-strength polyester enamelled round copper wire, and by VPI dipping treatment into a complete collection, winding and insulation with sophisticated electrical, mechanical, moisture and thermal stability.
(8) YBJ explosion-proof motor rotor to receive cast aluminum planning, rotor dynamic balance check, the motor work stable, small oscillation, low noise.
(9) YBJ explosion-proof motor set, the rotor punch to receive high permeability, low cost of excellent electrical silicon steel, the motor is low cost, obey the high.
(10) YBJ Explosion-proof motor main body shell material to receive seamless steel pipe or steel production, with a high impact resistance, bump hand, other shell parts are not less than HT250 made of gray cast iron.
(11) YBJ explosion-proof motor bearings use low oscillation, low noise bearings.
(12) YBJ explosion-proof motor fan, wind cover: to receive plastic, cast aluminum or cast iron fan, high strength, fan and shaft receiver key connection, running solid. Wind cover for the steel plate planning, in the prevention of certain size of the invasion of foreign objects under the premise of the largest ventilation area, so that the wind clear.Motor explosion proof is a special motor.YB2 series explosion-proof motor, YBB series explosion-proof motor, Type, YBBP series explosion-proof motor, YBBP series of frequency control flameproof motor TYPX series of ultra-efficient three-phase permanent magnet synchronous motor, TYBPE series of explosion-proof ultra-efficient three-phase permanent magnet synchronous motor, TYPCX series of oil Machine dedicated ultra-high efficiency three-phase permanent magnet synchronous motor, FXYT series of special ultra-efficient three-phase permanent magnet synchronous motor, TPA series of screw air compressor dedicated three-phase permanent magnet synchronous motor, and other series of more than 450 kinds of specifications models. Products are mainly sold to Shanxi, Shandong, Jiangsu, Jiangxi, more than 20 provinces and municipalities, is the state-level mine motor sentinel manufacturers, is one of the national explosion-proof motor production enterprises.
Kailida Motors Factory Advantages.
Prompt Quotation.
Competitive Price
Guaranteed Quality
Timely Delivery.
100% Tested.
Sincere and Professional Service.
Outstanding Finishing Surface.
Strictly and Perfect Management is guaranteed for Production.
Specialized in Manufacturing and Supplying a wide range of Electric Motors since year 2002.
Have Rich Experience and Strong ability to Develop New Products.
Have Ability to Design the Products Based on Your Original Samples.
WHAT WE DO AT KAILIDA
Stamping of lamination
Rotor die-casting
Winding and inserting - both manual and semi-automatically
Vacuum varnishing
Machining shaft, housing, end shields, etc^
Rotor balancing
Motor assembly
Painting - both wet paint and powder coating
Packing
Inspecting spare parts every processing
100% test after each process and final test before packing.
WHAT KAILIDA CAN DO FOR CUSTOMERS
Kailida supplies standard products to customers.
Kailida supplies standard products under customers' brands and packaging, etc
Kailida R&D department develops any new products together with the customers.
We Promise you all the time after you working with us for Win-Win Business.
Prompt Reply to Your Inquiry within 24 Hs during Working Days.
Long Life Time Products
Products One Year Guarantee from the Date of Sales.
Professional Service in Handling Your Goods in Daily Communications
Deliver Time about 15-20 days for Normal Models.
Deliver Time about 30 days for New Models upon Receiving the New Samples.
