If you have this speed reducer, pls let us know.
Looking forward to hearing from you.
Thank you for your inquiry.
Do you have a photo of products you need?
And please tell me some parameters,so that I can recommend the suitable model to you.
Good morning!How are you recently?
Sorry to disturb you again.Had you received my last emails?
The UFP11A is one of old model products and had been eliminated.
I sent our quotation to you in November, and there were 10 units in stock at that time; but now them had been sold out and out of stock.
Now the official replacement model given by SEW is DFP21B / UOH11B, as shown in the attachment,please kindly check.
https://download.sew-eurodrive.com/download/pdf/11479019.pdf
Please comfrim whether it is okay.
Sorry again.
Your early reply will be highly appreciated.
Bonjour, c'est Cherry de NER GROUP, content d'avoir votre eamil.
Et je vous avais envoyé notre devis le 8 février, mais il semble que vous ne l'ayez pas reçu.
Je vous ai encore envoyé notre devis par mon dernier e-mail, veuillez vérifier.
Si vous ne le recevez toujours pas, dites-le-moi.
Je vous remercie.
En attente de votre réponse.
Passez une bonne journée.
Bonjour, c'est Cherry de NER GROUP, content d'avoir votre eamil.
Et je vous avais envoyé notre devis le 8 février, mais il semble que vous ne l'ayez pas reçu.
Ici, je vous envoie à nouveau notre devis, veuillez vérifier.
Si vous avez d'autres questions, n'hésitez pas à me contacter.
Merci.
Au plaisir de vous entendre.
Prior to sogears.com! Agreement
"Starting on Febuary, 2020, sogears.com ! customers who have not updated their email account will no longer be able to log in to their sogears.com and through email addresses.
Customers will have to Verify their email address to confirm
VERIFT HERE
we apologise for any inconvenience caused.
Good morning!
How are you recently？
We had resumed work since last week.
If you have any needs in our range,please contact me.Then I'll quote you our competitive price.
Thanks.
This is Cherry from NER GROUP.Thank you for your inquiry.
And I sent our quotation to you by my last email,please kindly check.
If you don't receive it,please let me know.
Then I will send it to you again.
Thanks.
Waitting for your reply.
Good evening!
This is Cherry from NER GROUP.Glad to get your inquiry.
And please find our quotation attached for 45KW ABB motor you need.
Moreover,sorry,we don't have stock ,need to to manufacture.
And the manufacture time is about 4-5 weeks.
Should you have any further questions,please feel free to contact me.
Thanks.
Your early reply will be highly appreciated.
Thank you for your swift response.
Could you tell me whether what you need includes back stop or not?
Thanks.
Waiting for your reply.
Please advise datasheet and your discounted price asap
Awaiting your reply
We got your contact from one of our local supplier of Drilling machine, who referred us to your company in respect to good quality Product from your company
We will like to have more details regarding your company product and samples and also send to us your company profile and product catalog and price list.
Hope to have a good business relatinship with your company.
Hope for your quick response.Nous vous informons que le délai de clôture a été prolongé jusqu'au 12/03/2020
We are looking for:
Cast iron induction motors
400/690V 50Hz
6 pole
45kW
250 frame size
IP56
IE3 efficiency
B5 flange mounted
Non-hazardous area
IC416 cooling
IM3001
Fitted with 1024 pulse encoder
PT100 sensors in windings and bearings wired to separate terminal box
Initial quantity of 3 motors
Please advise price and availability.Täname kiire vastuse eest.
Ja pärast kliendi vastuse saamist andke mulle sellest teada.
Tänan teid väga.
Head päeva!
What you need is single phase electric motors.
And its max power is 7.5KW,torque is 51Nm.
Please confrim if this motor is okay.
Thanks.
Waitting for your reply.Täname kiire vastuse eest.
Mootor, mille ma teile saatsin, alalisvoolumootor. Ja mida vajate vahelduvvoolu mootorit?
Aitäh.
Ootan sinult huvi.
I hope you are well and doing good with your business!
We would be very grateful to you if you could provide to us a quotation based on the following attachment.
We believe in good quality at a reasonable price and we hope we will get the best offer possible.
Please also if you can send us those documents:
1. Catalogues of product and
2. ISO Certificate
3. Manufacturer Authorization
4. References
Deadline is at 08.04.2020-MANUFACTURING AND LIFTING A GRADE REDUCTOR-
Thank you in advance
Thank you for your swift reply on Wechat.
The B14 flange and output shaft of 1.1KW bevel motor will be made same as yours.And the mounting will be M5 as your requests.
In additional,About 5.5KW R87 helical gear motor,the distance of the feet mounting holes is different from us.
And our engineer said it cannot to be custom made the two dimensions marked in the following drawing.
Please confrim whether our dimensions are okay.
Tänan pakkumise eest – kas Teie käest saab ka lahenduse kuidas elektrivool(230V) jõuaks pöörlevasse reklaami (klemmühendus?!)
Good morning!How are you?
Glad to get your message on Alibaba.
And the manufacture time of cyclo gearbox is about 15 days.
Should you have any further questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.Bonjour! Merci pour la réponse.
Et quant aux moteurs M3AA et M3BP, pouvez-vous me dire s'il y a des progrès?
Je vous remercie.
Au plaisir de vous entendre.Tere hommikust!
See on Cherry firmalt NER GROUP. Rõõm teie päringu saamiseks.
Ja vastavalt teie nõudmistele soovitas meie insener teile seda tüüpi alalisvoolu mootorit.
Lisas on selle alalisvoolu käigukasti foto ja mõõtmed, palun kontrollige palun läbi.
Ja palun küsige, kas see mootor sobib.
Aitäh.
Ootan sinult kuulmist.
Thank you for your new inquiry.
Could you tell me some paremeters or send me the nameplate about this machine?
Thanks.
looking forward to hearing from you.
thank you for your help, we will get back to you shortly
Merci pour votre nouvelle demande, mais désolé, nous ne pouvons pas fournir ce produit.
Et voici notre catalogue: https: //www.bonwaygroup.com/gearbox-electric-motor-catalogue, merci de bien vouloir vérifier.
Si vous avez des besoins dans notre gamme, contactez-moi.Merci pour votre nouvelle demande, mais désolé, nous ne pouvons pas fournir ce produit.
Thank you for your reply.
Please find our quotation attached.
Thanks.
Looking forward to hearing from you.
Good morning!Hope you are doing well!
Have seen my message on whatsapp?
And could you tell me that is there any progress about worm gear motors?
Thanks.
Your early reply will be highly appreciated.
Have a wonderful day!
Good morning!Sorry to disturb you again.
Had you received my last email?
And could you advise is there any updated about 36VDC motor?
Thanks.
Looking forward to hearing from you.
Have a nice day!
Sorry to disturb you again.
Had you received my last email dated on Feb.24th?
About the products UFP11A you need,I received our products manager's news.
The this model UFP11A products of SEW brand had been discontinued for a long time.And UFP11A is one of old model products and had been eliminated.
I sent our quotation to you in November, and there were 10 units in stock at that time; but now them had been sold out and out of stock.
Now the official replacement model given by SEW is DFP21B / UOH11B, as shown in the attachment,please kindly check.
https://download.sew-eurodrive.com/download/pdf/11479019.pdf
Sorry to causing you inconvenience.
Good morning!Hope you are doing well!
Is there any update about the project of ZDY250 gearbox?
Thanks.
Looking forward to hearing from you.
Have a nice day!
Good morning!Hope you are doing well!
Is there any update about the project of ZDY250 gearbox?
Thanks.
Looking forward to hearing from you.
Have a nice day!
Thank you for your swift reply.
It could not to confirm which types of gear motor you need only based on the nameplate.
Thus,we need its outline drawing or photo to confrim.
Thanks.
Looking forward to hearing from you.
Good morning!How are you?
Thank you for your trust and support.We got your payment today.
And before we arrange the production,our engineer advise that please confrim the bevel gear motor's flange dimensions.
Because your specifications shows that the bevel gear motor is with B14 flange,but the gear motor KAF37 is with B5 flange.
Now enclosed are the drawings of KAF37 gear motor(with B5 flange) and the KAZ37 gear motor(with B14 flange) ,please kindly check.And please confrim which one dimension is okay.
Thanks.
Waitting for your reply.Good evening.Glad to get your inquiry.
Do you have a picture of gearbox you need?
As we have many kinds of gearboxes,I don't know which one you need.
And please tell me the power ,so that I can recommend the suitable model to you.
One of our clients require the following specification Fixed speed gear boxes. Please quote us suitable fixed speed gear boxes from your products and send us prices at the earliest.
HORIZONTAL MOUNTED FIXED SPEED GEAR BOXES
Type : 120
Ratio : 90:1
Input shaft dia : 30mm
Drive Shaft : Right angle to input shaft
Material of fabrication body : Cast Iron
Worm Gear : Hardened Steel;
Worm wheel : S.G. Iron
Qty : 08 Nos.
VERTICAL MOUNTED FIXED SPEED GEAR BOXES
Type : 120
Ratio : 90:1
Input shaft dia : 30mm
Drive Shaft : Mounted vertically down ward
Material of fabrication body : Cast Iron
Worm Gear : Hardened Steel;
Worm wheel : S.G. Iron
Qty : 08 Nos.
Waiting for your early reply.
Good day.Glad to get your email.
Could you send me the outline drawing of this gear motor?
Because we need to confrim what kinds of gear motor you need.
Thanks.
Waitting for your reply.
Thank you for your swift reply.
Here is our catalogu:https://www.bonwaygroup.com/gearbox-electric-motor-catalogue ,please kindly check.
And if you have any needs,please feel free to contact me.
Then I'll quote you our competitive price.
Thanks.
Have a nice day!
Can you give me price quote for attached order.
Delivery cost to PORT KLANG
Please note: Kuala Lumpur is a city. The nearest port is PORT KLANG.
If you have any question, please let me know
We are interested in your product, our company urgently in need of your product. pls send more details about the price and the delivery of the product .
I await for your reply so we can send our product specification,
Glad to get your reply.
About the distributor,No,we have no distributor in South Africa,but we are looking for suitable one.
And the manufacture time of 90VDC motors is about 10 days.
Should you have any further questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
Good afternoon.
This is Cherry from NER GROUP.Glad to get your inquiry.
And please find our pricelist for duct extractors.
Should you have any other questions,please feel free to contact me.
Thanks.Thank you for your swift reply.
Great.I'll wait for your news.
Thanks.Thank you for your kindly reply.
It wil be our great pleasure.
And I'll wait for your news.Thanks.Do you have a distributor of your products in South Africa?What is your delivery time on two 90VDC motors. We require them urgently
Kind regards
Leon Myburgh
We hope had a nice holiday
We definitely work in near future with your company
So thank you for cooperation and information.
Best regards
We hope had a nice holiday
We definitely work in near future with your company
So thank you for cooperation and information.
Best regards
We hope had a nice holiday
We definitely work in near future with your company
So thank you for cooperation and information.
Best regards
We hope had a nice holiday
We definitely work in near future with your company
So thank you for cooperation and information.
Best regardsGood day!Hope you are doing well!
We had come back to work from our holiday last week.
If you have any needs,please feel free to contact me.
Then I'll send you our competitive price.
Thanks.
Looking forward to hearing from you.
Have a nice day~This is Cherry from NER GROUP.Glad to get your inquiry.And sorry for the delay.
Please find our gearbox drawing attached.
And the input and output shafts could be custom made as per your dimensions.
Please confrim whether other dimensions are okay.
Thanks.
Waitting for your reply.
This is Cherry from NER GROUP.Glad to get your inquiry.And sorry for the delay.
Please find our gearbox drawing attached.
And the input and output shafts could be custom made as per your dimensions.
Please confrim whether other dimensions are okay.
Thanks.
Waitting for your reply.Good morning!
Please find our catalogue of motor.
And torque of the motor marked is 10077Nm.
Please confrim whether this motor is okay.
Thanks.
Waitting for your reply.
Good morning!
This is cherry from NER GROUP.Sorry for the delay.
And do you have the drawing of gear motor?
Thanks.
Looking forward to hearing from you.
Good afternoon.
This is Cherry from NER GROUP.Glad to get your inquiry.
And please find our quotation and drawing attached for gearbox and spare parts..
About i-ViI items you requested,they are shown in our quotation,please kindly check.
And the price I quote you inculdes 5% L/C handling cost and your 10% commission.
This Commission will be paid to you when we receive 100% payment.
Should you have further questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
Good morning!Hope you are doing well!
About the products you need,I received our products manager's news.
