English English
The model UFP11A products of SEW brand

The model UFP11A products of SEW brand

The model UFP11A products of SEW brand

The this model UFP11A products of SEW brand had been discontinued for a long time.And UFP11A is one of old model products and had been eliminated.
I sent our quotation to you in November, and there were 10 units in stock at that time; but now them had been sold out and out of stock.

Now the official replacement model given by SEW is DFP21B / UOH11B, as shown in the attachment,please kindly check.
https://download.sew-eurodrive.com/download/pdf/11479019.pdf
Sorry to causing you inconvenience.
This is Cherry from NER GROUP.Glad to get your inquiry.
And please find our pricelist for dust extractors.
Thanks.
Looking forward to hearing from you.
Good morning!
This is Cherry from NER GROUP.Glad to get your inquiry.
And enclosed are our quotation and drawing for parallel shaft gear motor,please kindly check.
Should you have any other questions,please feel free to contact me.
Thanks.
Your early reply will be highly appreciated.
Good afternoon.Hope you are doing well!
If the motor torque is 9550Nm and power is 300KW,the motor speed will be 300rpm-600rpm.
Please confrim if the speed is okay.
Thanks.
Waitting for your reply.
Thank you for your reply.
The torque of this motor is 1602Nm.
Should you have any further questions,please don't hesitate to contact me.
Thanks.
Have a nice day!
This is Cherry from NER GROUP.Glad to get your inquiry.
And please find our pricelist for dust extractors.
Thanks.


Looking forward to hearing from you.
Good day!Sorry for the delay.
We come back to work from our holiday this week and can supply the equivalent electric motors.
And the EX-work price and specifictions of our motor are as follows:
AC Three phase electric motor type:Y2-90L-4,4pole, power:1.5KW,460V,50HZ,ENCLOSURE RATING:TEFC
Protection calss:IP54,insulation class:F,duty:S1,IE2,speed:1390rpm,current:3.7A: 255USD per unit.
And the motor's drawing is attached to this email,please kindly check.
Thanks.
Looking forward to hearing from you.
Good afternoon.
This is Cherry from NER GROUP.Glad to receive your inquiry.
And the EX-work price and specifications of 3HP cyclo gear motor are as follows:
3HP cyclo gear motor model:BLD2,power:3Hp,ratio:15, vertical mounting,
electric motor type:Y2-100L1-4,4pole,380V,50HZ,IP54,insulation class:F,duty:S1,IE2 :285USD per set.
Moreover,here attached is our cyclo gear motor's photo for your reference.

The model UFP11A products of SEW brand

Should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
Thank you for your swift response.
Please find our quotation attached for 250KW motor.
Should you have any further questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
Good morning!Thank you for your feedback.
Enclosed is our updated quotation for 3KW vibrator motors,please kindly check.
Should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to your reply.
Have a nice day!
This is Cherry from NER GROUP.Glad to get your inquiry.
And enclosed are our quotation and drawing for SA87 gear motor,please kindly check.
Should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
This is Cherry from NER GROUP.Gald to get your inquiry.
And the voltage of motor you need is 250KV or 240V / 380 V?
Thanks.
Looking forward to hearing from you.
Thanks a lot for the mail wanted to know too since they are the same series the mode of operation is the same CHANGE-OVER SWITCH mode is Closed transition.
Good day!Hope you are doing well!
Could you tell me that whether the switches we provided (OT160E04CP-104) are the same shape and usage as that switches(OT160E04WCLP )?
The two switches are the same series products actually,both of which are OT160E04 series switches and with the same parameters.
And the reason why the last few digits of the models are different is that the countries of origin for the two models are different( the last few digits of the models is to distinguish the conutry of origin).
The switch model you asked for (OT160E04WCLP ) is made from abroad and the switch we provided (OT160E04CP-104) is made in China.
Have you got that?
Thanks.


Glad to get your email.
The current will be generated automatically by the generator itself when the water flow is stable.
There is no need a control panel.
Thanks.
This is Cherry from NER GROUP.Glad to get your inquiry.And sorry for the delay.
And do you have a photo of the gearbox you need?
Or here is our catalogue:https://www.bonwaygroup.com/gearbox-electric-motor-catalogue,please kindly check.
Then please tell me which types of gearbox you need.
Thanks.
Waitting for your reply.
Good day!Hope you are doing well!
Please find the specifications attached.
Any other questions,please feel free to contact me.
Thanks.
Have a nice day!
Thank you for your swift reply.
Enclosed are our quotation and drawing,please kindly check.
And If you need the motor with brake,we can also supply.
Should you have any further questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
Thank you for your swift reply.
Yes,we can supply the motor with this voltage 90VDC.
And as its rated voltage is 48V,the voltage 90VDC need to be custom made that will needs some extra cost.
Then the EX-work price of 90VDC motor you need will be 645USD per set.
Should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
Thank you for your swift reply.
Yes,we supply the motor with this voltage 90VDC.

The model UFP11A products of SEW brand

And as its rated voltage is 48V,the voltage 90VDC need to be custom made that will needs some extra cost.
Then the EX-work price of 90VDC motor you need will be 645USD per set.
Should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
Good day!
This is Cherry from NER GROUP.Glad to get your inquiry.
And please find our quotation and drawing for ZSY315 gearbox.
Should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
Good morning!Hope you are doing well!
Glad to get your new inquiry.
And please find our quotation for 3KW and 5KW vibrator motors.
If you have any further questions,please feel free to contact me.
In addition,is there any update about our previous quotations?
Thanks.
Looking forward to hearing from you.
Good morning!Thank you for your feedback.
And enclosed is our updated quotation for the combined gear box you need,please kindly check.
Should you have any other questions,please feel free to contact me.
Thanks.
Your early reply will be highly appreciated.
Have a nice day!
Thank you for your kindly reply.
I'll wait for your news.
Thanks a lot.
Have a nice day!
Thank you for your kindly reply.
I'll wait for your news.
Thanks.
Have a nice day!
Thanks so very much.
You will hear from me as soon as we are ready to order.
Thanks again.
Thank you for your reply.
Sorry,I forgot to write the input and output speeds in our offer.
And here attached is our updated quotation in where the input and output speeds are shown,please kindly check.
If you have any further questions,please feel free to contact me.
Thank you.
Looking forward to hearing from you.
Thank you for your reply.
Sorry,I forgot to write the input and output speeds in our offer.
And here attached is our updated quotation in where the input and output speeds are shown,please kindly check.
If you have any further questions,please feel free to contact me.
Thank you.
Looking forward to hearing from you.
Thanks for this quotation,
On the gear box there is no indication of input and out put speed. Pls can you ecplain to me why?
Regards,
Chris.
Thanks for your quotation.
The gear box did not indicate input and output speed?
Pls let me know why.
Thanks chris.
This is Cherry from NER GROUP.Glad to get your inquiry.
And please find our pricelist attached for dust extractors.
Should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
This is Cherry from NER GROUP.Glad to get your inquiry.
And please find our pricelist for dust extractors.
Thanks.
Looking forward to hearing from you.
I had sent our quotation to you in my last email.
If you don't receive it,please tell me,then I'll send it to you again.
And in addition, here attached are our drawings,please also kindly check.
Thanks.
Looking forward to your reply.
Have a nice day!
Good morning!Glad to get your email.
Yes,that staff you talked with is our manager.
And our engineer had selected the suitable models for you after studying.
Moreover,enclosed is our quotation,please kindly check.
Should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
Good afternoon.Hope everything goes well with you!
Please find our Proforma Invoice attached.
Thanks a lot.
Good morning!Thank you for your swift reply.
Enclosed are our quotation and drawing for parallel shaft gearboxes,please kindly check.
Should you have any other questions,please feel free to contact me.
Thank you.
Looking forward to hearing from you.
Good evening!
This is Cherry from NER GROUP.Glad to get your inquiry.
And please find our quotation and drawing attached for DCY gearbox you need.
Should you have any other questions,please feel free to contact me.
Thanks.

The model UFP11A products of SEW brand

Looking forward to hearing from you.
Thank you for your reply.
Okay.I'll wait for your news.
Thanks.
Have a nice day!
Merci pour votre réponse.
Et désolé, je ne trouve aucune pièce jointe dans cet e-mail.
Pourriez-vous me l'envoyer à nouveau?
Merci.
Bonjour, merci pour votre réponse rapide.
Si votre client a encore besoin du moteur à 2900 tr / min, désolé, il n'y a pas ce modèle 180L.
Et si la vitesse du moteur est de 1470 tr / min, le 180L existe.
Voici ci-joint notre catalogue pour votre examen.

Veuillez confirmer si la vitesse du moteur à 1470 tr / min correspond à vos attentes.
Merci.
En attente de votre réponse.
Good morning!This is Cherry from NER GROUP.Glad to get your inquiry.
And here attached is our pricelist for dust extractors,please kindly check.
Should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
Good morning!Hope you are doing well!
The power of your PMG (permanent magnet generator) is 1MW(1000KW),is it correct?
But the max power of the middle gearbox is 160KW,thus there will no suitable model for you.
Please confrim the parameters of your pmg.
Good afternoon.Thank you for your feedback.
Here I send our drawings and updated quotation to you again,please kindly check.
Should you have any further questions,please don't hesitate to contact me.
Thanks.
Looking forward to hearing from you.
Thank you for your swift reply.
What you mean is the grinding heads?

The model UFP11A products of SEW brand

If so,yes,these also are our own brand's.
Thanks.
Looking forward to your reply.
Good afternoon.Thank you for your feedback.
And please find our drawings and updated quotation.
Should you have any further questions,please feel free to contact me.
Thanks.
Your early reply will be appreciated.
Thank you for your swift reply.
The manufacture time of 50 units DBY160 gearbox will be 50 days at least.
And 100 units gearboxes with packages could be fitted in a 40ft container.
Should you have any further questions,please don't hesitate to contact me.
Thanks.
Looking forward to hearing from you.
This is Cherry from NER GROUP.
Glad to get your inquiry.
And could you advise me the following questions:
1.15 tons of goods will be lifted?
2.What's the speed of winch to lift up?
Thanks.
Waitting for your reply.
Thank you for your swift reply.
And how much the gearboxes do you would like to?
Thanks.
Looking forward to hearing from you.
Good morning!Hope you are doing well!
We had come back to work from our holiday.
If you have any needs,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
Have a wonderful day!Thanks for the quotation. I will forward this directly to our client. How much qty can we deliver per month on these items?
Good day!
This is Cherry from NER GROUP.Glad to get your inquiry.
Enclosed are our quotation and drawing,please kindly check.
And the shafts diameters will be custom made as per your requirments.
Then the output shaft will become thinner, which will cause this shaft to be easily broken.
Moreover,should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
Bonjour! Merci pour votre demande.
Veuillez trouver notre offre et le dessin ci-joint pour les moteurs.
Et veuillez confirmer si nos dimensions répondent à vos demandes.
Merci.
J'attends de vos nouvelles.
Good morning!Hope you are doing well!
We had come back to work from our holiday.
If you have any needs,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
Have a nice day!
Thank you for your swift reply.
Please find our updated quotation attached that has been revised.
Should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
Good morning!How are you recently?
Had you received our Proforma Invoice?
If not,I'll send it to you again.
Thanks.
Looking forward to hearing from you.
Thank you for your reply.
Please find our updated quotation attached that has been revised.
If you have any further questions,please feel free to contact me.
Thanks.
Looking for ward to hearing from you.
Thank you!

 Geared Motors And Electric Motor Manufacturer

The best service from our transmission drive expert to your inbox directly.

Get in Touch

Yantai Bonway Manufacturer Co.ltd

ANo.160 Changjiang Road, Yantai, Shandong, China(264006)

T+86 535 6330966

W+86 185 63806647

© 2024 Sogears. All Rights Reserved.