Yantai Bonway Manufacturer

Variant codes

Cast iron motors

Variant codes specify additional options and features to the standard motor. The desired features are listed as three-digit variant codes in the motor order. Note also that there are variants that cannot be used together.

Most of the variant codes apply to IE2, IE3, and IE4 motors. However, confirm the availability of variants for IE3 and IE4 motors with your ABB sales office before making an order.

Frame size

Code/Variants

71

80

90

100

112

132

160

180

200

225

250

280

315

355

400

450

Administration

529

Customer witnessed visual inspection of complete order line.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

530

Two-year extension on standard warranty

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

531

Sea freight packing

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

533

Wooden sea freight packing

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

590

Mounting of customer supplied part other than coupling

-

●

●

●

●

●

●

●

●

●

●

●

●

●

●

-

683

Prepared for ABB Ability Smart Sensor

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

684

ABB Ability Smart sensor mounted

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

Balancing

417

Vibration acc. to Grade B (IEC 60034-14)

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

423

Balanced without key.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

424

Full-key balancing

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

Bearings and Lubrication

036

Transport lock for bearings.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

037

Roller bearing at D-end.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

39

Cold-resistant grease

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

40

Heat-resistant grease

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

41

Bearings regreasable via grease nipples.

●

●

●

●

●

●

○

○

○

○

○

○

○

○

○

○

43

SPM compatible nipples for vibration measurement

●

●

●

●

●

●

○

○

○

○

○

○

○

○

○

○

57

2RS bearings at both ends.

●

●

●

●

●

●

●

●

●

●

●

-

-

-

-

-

58

Angular contact bearing at D-end, shaft force away from bearing.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

59

Angular contact bearing at N-end, shaft force towards bearing.

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

●

60

Angular contact bearing at D-end, shaft force towards bearing.

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

●

61

Angular contact bearing at N-end, shaft force away from bearing.

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

●

107

Pt100 2-wire in bearings.

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

●

128

Double PT100, 2-wire in bearings

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

●

129

Double PT100, 3-wire in bearings

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

●

130

Pt100 3-wire in bearings.

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

●

188

63-series bearing in D-end

●

●

●

●

●

●

○

○

○

○

○

○

○

○

○

○

194

2Z bearings greased for life at both ends

○

○

○

○

○

○

●

●

●

●

●

-

-

-

-

-

420

Bearing mounted PTC thermistors

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

433

Outlet grease collector

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

506

Nipples for vibration measurement : SKF Marlin Quick Connect stud CMSS-2600-3

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

593

Bearings grease suitable for food and beverage industry.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

654

Provision for vibration sensors (M8x1)

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

795

Lubrication information plate

-

-

-

-

-

-

●

●

●

●

●

○

○

○

○

○

796

Grease nipples JIS B 1575 PT 1/8 Type A

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

797

Stainless steel SPM nipples

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

798

Stainless steel grease nipples

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

799

Grease nipples flat type DIN 3404, thread M10x1

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

800

Grease nipples JIS B 1575 PT 1/8” pin type

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

Brakes

517

KFB holding brake

-

-

-

-

-

-

-

-

-

-

-

●

●

●

-

-

518

SFB-SH holding brake

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

-

Branch standard designs

142

Manilla connection.

-

-

●

●

●

●

●

●

●

●

●

●

●

-

-

-

○ = Included as standard │ ● = Available as option │ - = Not applicable

 

Frame size

Code/Variants

71

80

90

100

112

132

160

180

200

225

250

280

315

355

400

450

172

Smoke venting specification, 300 ºC, 1 hour, DOL use, class F300 ac  cording to EN 12101-3

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

-

173

Smoke venting specification, 200 ºC, 2 hours, DOL use, class F200 according to EN 12101-3

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

-

174

Smoke venting specification, 400 ºC, 2 hours, DOL use, class F400 according to EN 12101-3

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

-

177

Design for high ambient applications

-

-

-

-

-

-

●

●

●

●

●

-

-

-

-

-

178

Stainless steel / acid proof bolts.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

204

Jacking bolts for foot mounted motors

-

-

-

-

-

-

●

●

●

●

●

●

●

○

○

○

209

Non-standard voltage or frequency, (special winding).

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

386

Smoke venting specification, 200 ºC, 2 hours, VSD use, Class F200 according to EN 12101-3.

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

-

387

Smoke venting specification, 300 ºC, 1 hour, VSD use, Class F300 ac  cording to EN 12101-3

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

-

389

Smoke Venting specification, 400 ºC, 2 hours, VSD use, Class F400 according to EN 12101-3

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

-

392

Smoke Venting specification, 250 ºC, 2 hours, DOL use, Class T250

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

-

393

Smoke venting specification, 250 ºC, 2 hours, VSD use, Class T250

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

-

396

Motor designed for minimum ambient temperature -20 °C to -40 °C, with space heaters (code 450/451 must be added)

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

397

Motor designed for minimum ambient temperature -40 °C to -55 °C, with space heaters (code 450/451 must be added)

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

398

Motor designed for minimum ambient temperature -20 °C to -40 °C

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

399

Motor designed for minimum ambient temperature -40 °C to -55 °C

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

425

Corrosion protected stator and rotor core.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

524

Special run-out tolerances on flange and shaft for close coupled pump applications.

-

-

-

-

-

-

-

-

-

-

-

●

●

●

-

-

625

Design for mining applications

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

-

786

Special design shaft upwards (V3, V36, V6) for outdoor mounting.

-

-

-

-

-

-

●

●

-

●

●

-

-

-

-

-

877

Design for high ambient applications, motor without fan and fan cover

-

-

-

-

-

-

●

●

●

●

●

-

-

-

-

-

Cooling system

44

Unidirectional fan for reduced noise level. Rotation clockwise seen from D-end. Available only for 2-pole motors.

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

45

Unidirectional fan for reduced noise level. Rotation counter clockwise seen from D-end. Available only for 2-pole motors.

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

68

Light alloy metal fan

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

75

Cooling method IC418 (without fan).

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

183

Separate motor cooling (fan axial, N-end).

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

206

Steel fan

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

422

Separate motor cooling (on top) with integrated fan motor

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

514

Separate motor cooling (fan on top)

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

791

Stainless steel fan cover

-

-

-

-

-

-

-

-

-

●

●

●

●

●

●

●

Coupling

35

Assembly of customer supplied coupling-half

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

Documentation

141

Binding 2D main dimension drawing.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

370

Motor model drawing in 3D

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

374

Binding 2D motor detailed drawing

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

536

Photos of manufactured motors

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

537

Advanced data sheet

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

722

Rotor dimension drawing (incl. torosional stiffness)

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

777

Premium documentation package

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

Drain holes

65

Plugged existing drain holes.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

448

Draining holes with metal plugs.

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

Earthing Bolt

67

External earthing bolt

●

●

●

●

●

●

○

○

○

○

○

○

○

○

○

○

525

External earthing bolts on motor feet

-

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

Hazardous Environments

456

Ex ec IIC T3 Gc acc. IEC/EN 60079-7 with certificates.

-

-

-

-

-

-

-

-

-

-

-

●

●

●

-

-

Heating elements

450

Heating element, 100-120 V

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

451

Heating element, 200 - 240 V

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

 ○ = Included as standard │ ● = Available as option │ - = Not applicable

 

Frame size

Code/Variants

71

80

90

100

112

132

160

180

200

225

250

280

315

355

400

450

14

Winding insulation class H.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

405

Special winding insulation for frequency converter supply

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

406

Winding insulation for supply > 690 <= 1000 volts

-

-

-

-

-

-

-

-

●

●

●

●

●

●

●

●

Marine

24

Fulfilling Bureau Veritas (BV) requirements, with certificate.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

25

Fulfilling Det Norske Veritas (DNV) requirements, with certificate.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

26

Fulfilling Lloyds Register of Shipping (LR) requirements, with certifi

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

cate.

27

Fulfilling American Bureau of Shipping (ABS) requirements, with

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

certificate.

49

Fulfilling Germanischer Lloyd (GL) requirements, with certificate.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

50

Fulfilling Registro Italiano Navale (RINA) requirements, with certifi

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

cate.

51

Fulfilling Russian Maritime Register of Shipping (RS) requirements,

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

with certificate.

96

Fulfilling Lloyds Register of Shipping (LR) requirements, without

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

certificate (non-essential duty only)

186

Fulfilling Det Norske Veritas (DNV) requirements, without certificate

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

481

Fulfilling Nippon Kaiji Kyokai (NK) requirements, with certificate

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

483

Fulfilling China Classification Societies (CCS) requirements (Beijing),

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

with certificate.

484

Fulfilling Korea Register of Shipping (KR) requirements, with certifi

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

cate.

491

Fulfilling Nippon Kaiji Kyokai (NK) requirements, without certificate.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

492

Fulfilling Registro Italiano Navale (RINA) requirements, without

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

certificate.

493

Fulfilling China Classification Societies (CCS) requirements (Beijing),

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

without certificate.

494

Fulfilling Korea Register of Shipping (KR) requirements, without

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

certificate

496

Fulfilling Bureau Veritas (BV) requirements, without certificate(non

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

essential duty only)

497

Fulfilling Russian Maritime Register of Shipping (RS) requirements,

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

without certificate.

675

Fulfilling American Bureau of Shipping (ABS) requirements, without

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

certificate (non-essential duty only)

676

Fulfilling Germanischer Lloyd (GL) requirements, without certificate

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

(non-essential duty only)

Mounting arrangements

8

IM 2101 foot/flange mounted, IEC flange, from IM 1001 (B34 from

●

●

●

●

●

●

-

-

-

-

-

-

-

-

-

-

B3).

9

IM 2001 foot/flange mounted, IEC flange, from IM 1001 (B35 from

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

B3).

47

IM 3601 flange mounted, IEC flange, from IM 3001 (B14 from B5).

●

●

●

●

●

●

-

-

-

-

-

-

-

-

-

-

64

NEMA D-flange

-

-

-

-

-

-

-

-

-

-

-

-

-

●

-

-

66

Modified for specified mounting position differing from IM B3

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

(1001), IM B5 (3001), B14 (3601), IM B35 (2001), IM B34 (2101)

305

Additional lifting lugs.

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

320

IM2001 foot/flat bottom flange mounted, from IM1001 (B35 flat bot

●

●

●

●

●

●

-

-

-

-

-

-

-

-

-

-

tom flange from B3)

Noise reduction

55

Noise reduction cover for foot mounted motor

-

-

-

-

-

-

-

-

-

-

-

●

●

●

●

●

Painting

105

Paint thickness report

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

114

Special paint color, standard grade

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

115

Painting system C4M acc. to ISO 12944-2: 1998

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

168

Primer paint only.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

303

Painted insulation layer on inside of the terminal boxes.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

710

Thermally sprayed zink metallizing with acrylic top coat

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

711

Painting system C5-M very high, acc. to ISO 12944-5:2007

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

712

Painting system C5-M according to Petrobras specification.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

713

Painting system according Total Egina specification.

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

754

Painting system C5M acc. to ISO 12944-2:1998

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

755

Norsok M-501 revision 6, Coating system no. 1

-

-

-

-

-

-

●

●

●

●

●

●

●

●

●

●

Protection

○ = Included as standard │ ● = Available as option │ - = Not applicable