INDUCTION MOTOR (SQ. CAGE TYPE) 160KW.500VAC50HZ.3-PHASE.4-POLE.1500RPM.ISC: F.POWER FACTOR. 0.87.FRAME 315M.
DUTY CLASS S1, IP 55, SELF VENTILATED
Qty. # 02
Thank you for your swift reply.
Enclosed is the new Proforma Invoice in where your address is shown,please kindly check.
Should you have any further questions,please don't hesitate to contact me.
Thanks.
Have a nice day!
Please give me best price for the goods below :
1. GEARBOX, INPUT RPM 1410 R/MIN
OUTPUT RPM 4.1 R/MIN, REDUCTION RATIO 342.00,
TORQUE 3160 NM, ISO VG 220,
REF: SEW-KA97/TR57DT90L4/VS, FOR CHAIN CLEANING SSC
2. GEARBOX, FOR MOTOR GRINDER BOTTOM ASH,
TYPE HORIZONTAL PINWHEEL CYCLOIDAL,
STAGE: ONE STAGE,
MOUNTED: FOOT MOUNTED, RATIO: 1 : 3.4,
INPUT RPM: 1371, D:80, D1: 40,
REF: XW-8185,
DRAWING ATTACHED
3. FLUID COUPLING, FOR MOTOR GRINDER BOTTOM ASH,
TYPE: CONSTANT FIILING FLUID COUPLING,
D: 345 MM, D1: 38 MM, D2: 40 MM, OIL FILL: 1.4-2.8 LITER OIL: ISO VG-68,
REF: YOX280A, DRAWING ATTACHED
4. ROTARY FEEDER, FOR BUCKET ELEVATOR BOTTOM ASH,
DIMENSION: A1:410MM, B1:365 MM, C1: 300 MM, H: 450 MM, E:800 MM,
REF: XG-100T/H,
WUXI SHENQUAN POWER EQUIPMENT CO., LTDSorry,I forget to tell you the price shown in our quotation includes your 10% commission.
Thanks.
Have a nice day~
Good morning!Glad to receive your email.
Please find the new quotation attached in where the date has been updated.
And the price of the gear box raw material is rising rapidly, which leads to the increase of our production cost.
Although the price of gearboxes has been risen,we would like to start friendly business relationship with you,thus,the price shown in the new quotation don't be incresed for you.
Should you have any further questions,please don't hesitate to contact me.
Thanks.
Looking forward to hearing from you.Thank you for your swift response.
I had sent our updated Proforma Invoice to Rakesh Gosai and copy to you.
If you have any other questions,please don't hesitate to contact me.
Thanks.
Looking forward to hearing from you.
Have a nice day!
Good morning!
This is Cherry from NER GROUP.Glad to get your email.
And please find the updated Proforma Invoice attached that has been revised.
Should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.Cherry
I have asked PE Hydraulics to purchase the motors on behalf of Schaeffler .
Rakesh Gosai will be the contact person.
Kind regards
Leon Myburgh
Good afternoon.Sorry to disturb you again.
Today we got an email about the Proforma Invoice I sent you,as follows:
Because I find this company is different from the one mentioned in your last email.
Please confrim whether you know this company and let this company purchase motor from us?
Moreover,do you have Skype,whatsapp or Wechat?
Thanks.
Waitting for your reply.
hope that you are well & all your family in good health.
the silos tender will be repeated, the closing date is march 26.
please renew your offer & please include 10% commission in the price
Best Regards
Munir
We would like to conclude this requirement with the following terms and requested to provide details with acceptance to finalize on urgent basis.
1) Custom duty and processing charges in China to your account and in India to Jindal account.
2) Packing charges - Nil.
3) Delivery – Within 1-2 Week.
4) Payment – as the transaction value is less we would like to conclude with 100% by electronic transfer within 30 days after receipt of material.
5) Banking charges (Wire Transfer fee) – Nil
6) We can conclude this requirement with 20% Discount on quoted Prices.
Following documents are required along with Material. The same shall be send once the material is lifted from your work for further custom clearance at Indian port.
1) Invoice
2) Packing list
3) Bill of Lading
4) Test Certificate
5) Certificate of Origin
7) Warranty Certificate against manufacturing defect for 12 months.
8) Description on invoice must be paste on product and on packaging for smooth custom clearance.
Good afternoon.Sorry to disturb you again.
Today we got an email about the Proforma Invoice I sent you,as follows:
Because I find this company is different from the one mentioned in your last email.
Please confrim whether you know this company and let this company purchase motor from us?
Moreover,do you have Skype,whatsapp or Wechat?
Thanks.
Waitting for your reply.
Good day!This is Cherry from NER GROUP.Glad to get your inquiry.
And enclosed is our quotation for ABB motors and fan,please kindly check.
About the second motor,sorry,we cannot supply.
And we can't supply the third motor(Nema standard) either,I quote you an IEC standrad motor whose drawing is also attached to this email,please kindly check.
Moreover,the items you required are shown in our quotation.
Should you have any further questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
This is Cherry from NER GROUP who is manufacturing gearboxes,speed reducers and gear motors with good quality and price.
And you are welcomed to visit our catalogue website for more information:
https://www.bonwaygroup.com/gearbox-electric-motor-catalogue
Thanks.This is Cherry from NER GROUP who is manufacturing gearboxes,speed reducers and gear motors with good quality and price.
And you are welcomed to visit our catalogue website for more information:
https://www.bonwaygroup.com/gearbox-electric-motor-catalogue
Thanks.
This is Cherry from NER GROUP who is manufacturing gearboxes,speed reducers and gear motors with good quality and price.
And you are welcomed to visit our catalogue website for more information:
https://www.bonwaygroup.com/gearbox-electric-motor-catalogue
Thanks.This is Cherry from NER GROUP who is manufacturing gearboxes,speed reducers and gear motors with good quality and price.
And you are welcomed to visit our catalogue website for more information:
https://www.bonwaygroup.com/gearbox-electric-motor-catalogue
Thanks.
Good Day
Please see the attached.
Could you change the invoice to reflect our company details please?
All my details are below.
Thanks
Rakesh
Good morning!Hope you are doing well!
Have you received our quotation for MBY1000 gearbox?
If not,please let me know.Then I'll send it to you again.
Thanks.
Your early reply will be highly appreciated.
Have a nice day!
Good afternoon.How are you recently?
Have you received our quotation for ZSY160 gearbox?
If not,please let me know.Then I'll send it to you again.
Thanks.
Waitting for your reply.
Thank you for your swift reply.
Firstly we need to know the power of vibrator motor you need.
I mean the power is ??KW or ??HP.
Then I'll send you our competitive price.
Thanks.
Looking forward to hearing from you.
Good afternoon!How are you recently?
Don't get your news for several days.
Is there any progress about this project?
Thanks.
Looking forward to hearing from you.
Good afternoon!Hope you are doing well!
Had you received our quotation for XW8185 and YOX280A?
If not,please let me know,then I'll send it to you again.
Thanks.
Waitting for your reply.
Good morning!Hope you are doing well!
It has been several days since I receied your email last time.
Do you still need our 36VDC motor?
Thanks.
Waitting for your reply.
Good morning!This is Cherry from NER GROUP.
Glad to get your inquiry and sorry for the delay.
And we can supply the equivalent gear motors,please find our quotation attached.
Should you have any further questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.
Good morning!
Thank you for your trust and support.
And please find our Proforma Invoice attached in where our payment information is shown.
Should you have any further questions,please feel free to contact me.
Thanks a lot.
Looking forward to hearing from you.
Have a nice day~Good day,
Please revert your best offer and delivery date for the following items & as per attached files, within next 2 working days.
- Note1: Please remember to highlight or bold any technical variations within your offer.
- Note2: Please quote your offer for GENUINE ONLY)
*** Meanwhile, please advise the AIR /SEA freight charges.***
(offers not quoting freight charge will not be considered)
Dear Valued Customer,
The payment details enclosed has been processed and will be credited into your account in three (3) business days.
JC GLOBAL REMITTANCE AND MONEY EXCHANGE DATE: 03/03/2020
Credit memo (CREDIT ADVICE)
Please send your quote for the below item:
PLEASE PROVIDE DATASHEET / PICTURE FOR THE SAME YOU QUOTE
PLEASE QUOTE TH E FOLLOWING, SEE ATTACHED FOR DETAILS And give us your best price)We have requirement for the below electric motors , could you please send us your best discounted price for the same.
Please take a note on the below ,
Please mention the delivery date :
Please mention the price Ex works or DDP , Oman :
If Ex works price , please mention the weight and size of the shipment
Please mention if the packing is included in your pricing
Hope VAT / tax is not applicable for the export products .
Please mention Country of Origin
Please mention warranty details
1
MOTOR,ELEC,ABB-D&M,M2BA100L2A,3kW
Material Text:
Electric motors
Voltage 380 Vac / 420 Vac
Frequency 50 Hz
Phase 3
Full load current 6.1 A
Frame size 100L
Method of mounting B3
Insulation class F
Ingress protection IP 55
Classification hazardous ExnAIIT3
No. of poles 2
Ambient temperature 55 °C
Method of cooling IC 411
Power factor 0.88
Speed 2870 r/min
Power rating 3 kW
Model M2BA100L2A
Duty S1
Bearing drive end 6206-C3
Bearing non drive end 6206-C3
Standard IEC34-1
Manufacturer ABB DRIVES AND MOTORS
Manufacturer Part Number 3GTA101 510-ADA
1
2
MOTOR,ELEC,MELOTTEP,UPDP60,415V,60hp
Material Text:
Electric motors
Voltage 415 V
Frequency 50 Hz
Insulation class H
Speed 2900 r/min
Power rating 60 hp
Number, cores 4
Cross section, cores 50 mm²
Length 5 m
Casting in bronze 88/10/2
With 3 core motor lead and moulded
Manufacturer MELOTTE PUMPTECHNOLOGY
Manufacturer Part Number UPDP60
1
3
MOTOR,ELEC,BALDOR,06G428W367G1,1500r/min
Material Text:
Electric motors
Type of motor SQUIRREL CAGE INDUCTION
Voltage 415 Vac
Phase 3
Full load current 7.1 A
Frame size 182T
Method of mounting FOOT
Direction, rotation BI-DIRECTIONAL
Method of cooling FAN
Speed 1500 r/min
Power rating 5 hp
Standard NEMA-T
Manufacturer BALDOR ELECTRIC
Manufacturer Part Number 06G428W367G1
1
4
FAN,BLOWER,613-FX,ABB
Material Text:
Spare_parts
Part name FAN,BLOWER
Equipment name MOTOR
Typical Serial Number:
The part must be identical and interchangeable with the
parts installed in similar equipment .A representative
typical Serial Number of the equipment is KF7708.
Manufacturer ABB
Manufacturer Part Number 613-FXYes, I do require the motors. I am currently in contact with a South African company called Mytech Sales and services who will purchase the items from you and supply to Schaeffler.
Please send me your payment information and I will get our finance department to do transfer of funds.
Kind regards
Thanks for your urgent response.
I am actually looking for the motor that can vibrate a 2.5kg tray, with remote control, or a timer for
Start and stop purpose. What power are you asking? For a supply or a level of vibration?
For the supply its ok any of the power source, for the power or level of vibration I don’t have any idea,
I just want to vibrate a 2.5kg tray. Or its better to have an adjustable level of vibration.
Thank you for your swift and kindly reply.
Okay.I'll wait for your news.
Thanks a lot.
Good Day Cherry, this is pending from our customer side.
If we get any response from them, I will definitely get back to youGood Day Cherry, this is pending from our customer side.
If we get any response from them, I will definitely get back to youGood day!How are you?
This is Cherry from NER GROUP.Glad to get your inquiry.
And we can supply the vibrator motors,here is our website of vibrator motors:https://www.sogears.com/vibration-motor,please kindly check.
And please tell me the power of vibrator motor you need.
Thanks.
