The shape of the square Shaded pole induction motor is square, the standard size is 83X83MM. It makes the most use of the silicon steel sheet material.
The Shaded pole induction motor's degree of protection is IP42, and the stator coils of the motor are all enclosed.
The insulation class of the motor is class B, and the maximum temperature allowed by the coil is 120 degrees.
Shaded pole induction motor protection form; the Shaded pole induction motor below 10W (shouting 10W) is impedance protection. The motor with output greater than 10W adopts thermal protector.
The thermal protector cuts off the temperature by 135 degrees.
Rated input; 230V, AC 50/60HZ
Direction of rotation; counterclockwise from the output of the shaft.
Bearing; oil bearing.
Service life; average 30,000 hours.
The blade is used; the blade diameter is from 22 degrees to 28 degrees and 34 degrees from 154MM to 300MM.
The blade is made of five pieces and is stamped and formed from an aluminum alloy plate. The shaft end of the motor has a threaded hole and is equipped with a plastic coupling.
The blades are mounted on the coupling and secured with screws.
Installation angle; the best installation method for oil-impregnated bearing Shaded pole induction motor is horizontal installation.
Our Shaded pole induction motor SCOPE: Fan heater,Ventilation fan,Bathroom fan,Air humidifier,small fan.Halogen heater,Qutza heater,Oil filled radiator Heater,Radiant heaters,Suction fan,oscillating fans,Cross-flow fans,Inline duct fan,Canal fans,Axial fans.Bathroom fan,toilet fan,Exaustores residencials.Wall fan,Domestic fan.Rang hood.Freezer,Micro-wave oven,pump,Air purifiers,Machine incising glass,medical equipment.
1.Our motors performance(data) are per customers` requirments.
2.Shaded pole induction motorwires are cooper and some could be used aluminium wire to save cost
3.Shaded pole induction motor could be used ball bearing and oil bear(Sleeve bearing) both.
4.Insulation Class B/F
withstand voltage:1800V/S/0.5mA
Rotation:CW (view from the shaft side)
Noise<50dB
Interturn Isulation:>2100V
Isulation Resistance:20MΩ
IP:34
Life span:>2000Hours (continuous working).Normal use:10 years
Operation Temperature/Humidity Range:-40°C to +65°C, 0%~95%
5.Safe,reliable, low noise, high performance,characteristics hard, good and stable starting, long life, etc.
6. Shaded pole induction motor Typical Application: Exhaust fan, air purifier, micro-oven, fan, induction cooker, refrigerator, pump, heater, hood oven, blwer, air conditioner, Heater machines, dehumidifiers
Shaded pole induction motor JZ82 series:
(JZ8213 JZ8220 JZ8225 JZ8230….)
Application: Freezers, Display cabinets, Refrigerators
Voltage/Frequency: AC110~240~V 50~60Hz
Thickness: 14~30mm
Input power: 20~60W
Size: 82*82
Pole : 2,4
Shaded pole induction motor JZ60 series:
(JZ6012、JZ6016、JZ6020、JZ6025、JZ6030、JZ6035、JZ6040 ….)
Application:Air Purifier Heater Humidifier
Voltage/Frequency: AC110-240V 50-60Hz
No-load Speed: 2500-3200rpm/min
Input power: 5-30W
Thickness: 12-35mm
Size: 61x61.5
Pole : 2
Shaded pole induction motor JZ48 series:
(JZ4810、JZ4816、JZ4820、JZ4825 …)
Application: Heater Humidifier
Voltage/Frequency: AC110~240V 50~60Hz
Thickness: 10~20mm
No-load Speed: 1800~2400rpm/min
No-load curret: 0.04~0.02A
Input power: 5~20W
Size: 48*48
Pole :2
Shaded pole induction motor Jz58 series:
Application: Heater Humidifier Massage
Voltage/Frequency: AC110-220V 50-60Hz
Thickness: 12-30mm
No-load Speed: 2600-3000rpm/min
No-load curret: 0.06-0.12A
Input power: 5-25W
Size: 58mm
Pole :2
Model Number |
Diameter mm |
Input Power W |
Direction |
Angle |
Voltage V |
Current A |
M4Q045-BD01-01 |
200 |
29 |
V |
28° |
220 |
0.19 |
M4Q045-CA01-01 |
200 |
31 |
V |
28° |
220 |
0.20 |
M4Q045-CA03-51 |
230 |
36 |
V |
28° |
220 |
0.25 |
M4Q045-CF01-01 |
250 |
60 |
V |
28° |
220 |
0.42 |
M4Q045-DA01-01 |
250 |
70 |
V |
28° |
220 |
0.48 |
M4Q045-DA05-01 |
300 |
86 |
V |
28° |
220 |
0.62 |
M4Q045-EA01-01 |
300 |
90 |
V |
28° |
220 |
0.62 |
M4Q045-EF01-01 |
300 |
110 |
V |
28° |
220 |
0.75 |
Cross Flow Shaded pole induction motorFor home Appliances, Typical uses on commonly Heater, Air cooling Fan etc
Volt(v)=110V-240v
Freq(HZ)=50/60HZ
Current(A)=0.18-0.43 based on different stator thickne
Input power on loading: From 13W to 36W based on different stator thickness
Torque: 60g. Cm to 120g. Cm based on different stator thickness
Shaded pole induction motor Shaft diameter(mm)=4-6mm
Shaded pole induction motor Shaft length(mm)=according to customer's requirement
Shaded pole induction motor Speed(r/min): 2600-3400 based on different stator thickness
Shaded pole induction motor Fan Diameter: 60mm
Fan length: Optional from 120mm to 360mm
MODEL | AOF SIZE | SHAFE DIA | VOLT | INPUT POWER | TORQUE (g.cm) | SPEED RATED |
YJ6012 |
12mm |
4mm |
110-240V |
18W |
120 |
3000RPM |
YJ6014 |
14mm |
4.5mm |
110-240V |
25W |
150 |
3000RPM |
YJ6016 |
16mm |
4.5mm |
110-240V |
30W |
180 |
3000RPM |
YJ6020 |
20mm |
5mm |
110-240V |
35W |
260 |
3000RPM |
YJ6025 |
25mm |
6mm |
110-240V |
45W |
350 |
3000RPM |
YJ6030 |
30mm |
6mm |
110-240V |
53W |
380 |
3000RPM |
5-120v Shaded pole induction motor
1. Stator size is optional
2. Safe, reliable, low noise, good starting, long life
3. Strong power
Rated voltage 110~120V/220~240V-50/60Hz
Typical used: Exhaust fan, air purifier, micro-oven, fan, induction cooker, refrigerator, pump, heater, hood oven, blwer, air conditioner, Heater machines, dehumidifiers
Thermal protector with one shot fuse or multi shot fuse
1. A of size: 30mm
2. Power: 78W
3. Shafe dia: 4mm
4. Thermal protection, reliable, low noise, good starting
YZF-5W shaded pole motor for freezer/refrigerator/showcase
The ambient temperature of the shaded-pole motor is -25°C~+50°C, the insulation class is class B, protection grade is IP42, and it has widely used in condensers,evaporators and other equipment.
We started our business from shaded pole motors, after 10 years development,our products is enlarged to BLDC motors ,capacitor motors ,synchronous motors,stepping motors,servo motors, and PMDC motors.Our products are widely used for making refrigerators, freezers, micro-wave ovens, air warmers, air exhausters, ventilators,ovens, air filter, massage machines and many other equipments.
To design the lastest technology motors and meet our customers requirments,we have the very capable R&D team,to ensure our products quality ,we have very strict manage system for our production department & QC department,to make our cost lower,we have the very professional purchase department, We dedicate to make every details better than we could do.
To offer quick and better service to our customers in Australia and New Zeland,we set up branch office in Australia since 2017 with exprienced consultant to support the business ,which will bring more customers to get know of us.
We will keep doing our job,move forward step by step to make our business area wider and brighter.
The best service from our transmission drive expert to your inbox directly.
Yantai Bonway Manufacturer Co.ltd
ANo.160 Changjiang Road, Yantai, Shandong, China(264006)
T+86 535 6330966
W+86 185 63806647