English English
400-1-gear-reducer

Worm gear motor with encoder,worm gear motor india

worm gear motor india Worm gear motor with encoder gear reducer

 

The main transmission structure is: Worm gear motor with encoder gear, sun gear, outer ring gear.

 

Due to structural reasons, the Worm gear motor with encoder reducer has a minimum of 3 for single-stage deceleration and a maximum of 10 for maximum. The common reduction ratio is 3.4.5.6.8.10. The number of reducer stages is generally not more than 3, but there are some large reduction ratios. 4 levels of deceleration. Compared with other reducers, the Worm gear motor with encoder reducer has high rigidity, high worm gear motor india (single level can be less than 1 minute), high transmission efficiency (97%-98% for single stage), high torque/volume ratio, lifetime maintenance free, etc. Features. Because of these features, Worm gear motor with encoder reducers are mostly installed on stepper motors and servo motors to reduce speed, increase torque, and match inertia.

 

The rated input speed of the Worm gear motor with encoder reducer can reach up to 18000 rpm (depending on the size of the reducer itself, the larger the reducer is, the smaller the rated input speed is). The output torque of the industrial grade Worm gear motor with encoder reducer is generally not more than 2000Nm, and the special super-torque Worm gear motor with encoder reducer Can achieve more than 10000Nm. The working temperature is generally between -25 ° C and 100 ° C. The operating temperature can be changed by changing the grease.

 

The worm gear motor india Worm gear motor with encoder reducer is very important because it is equipped with a servo motor. The backlash level (arc) is quite important. The price difference of different backlash grades is quite large. The Worm gear motor with encoder reducer can do multi-tooth box connection with the highest reduction ratio of 100,000.

 

Applicable conditions:

The peripheral speed of the gear reducer of the reducer does not exceed 10 m / s.

The input shaft speed is not higher than 1500 rpm.

The working environment temperature of the reducer is -40 °C - +45 °C.

The reducer can be used in both forward and reverse directions.

 

Worm gear motor with encoder gear reducer:

Due to structural reasons, the Worm gear motor with encoder reducer has a minimum of 3 for single-stage deceleration and a maximum of 10 for maximum. The common reduction ratio is 3.4.5.6.8.10. The number of reducer stages is generally not more than 3, but there are some large reduction ratios. 4 level deceleration.

Compared with other reducers, the Worm gear motor with encoder reducer has high rigidity, high worm gear motor india (single level can be less than 1 point), high transmission efficiency (single stage is 97%-98%), high torque/volume ratio, lifetime maintenance free, etc. Features.

 

Because of these characteristics, Worm gear motor with encoder reducers are mostly installed on stepper motors and servo motors to reduce the speed, increase the torque, and match the inertia.

 

The rated input speed of the reducer can reach up to 18000 rpm (depending on the size of the reducer itself, the larger the reducer is, the smaller the rated input speed is). The output torque of the industrial grade Worm gear motor with encoder reducer is generally not more than 2000Nm. The special super-torque Worm gear motor with encoder reducer can be used. It is above 10000Nm. The working temperature is generally between -25°C and 100°C. The operating temperature can be changed by changing the grease.

 

Several concepts:

Number of stages: the number of sets of Worm gear motor with encoder gears. Since a set of star gears cannot satisfy a large gear ratio, sometimes 2 or 3 sets are required to meet the requirements of a larger gear ratio. Due to the increase in the number of star gears, level 2 Or the length of the 3-stage reducer will increase, and the efficiency will decrease.

Return gap: The output end is fixed, the input end rotates clockwise and counterclockwise, so that the input end produces a rated torque +-2% torque, the input end of the reducer has a slight angular displacement, this angular displacement is the return clearance. It is a "point", which is one-sixtieth of a degree. Some people call it backlash.

 

Worm gear motor with encoder cycloid reducer:

All transmissions can be divided into three parts: the input part, the deceleration part, and the output part. A double eccentric sleeve with a 180° misalignment is mounted on the input shaft, and two roller bearings called a jib are mounted on the eccentric sleeve. The central hole forming the H mechanism and the two cycloidal wheels is an eccentric sleeved slewing bearing. a raceway, and the cycloidal wheel and the needle gear are engaged with a set of annularly arranged pin teeth to form an internal meshing speed reduction mechanism with a tooth difference of one tooth (in order to reduce friction, in a speed reducer with a small speed ratio) , the needle teeth have a needle sleeve). When the input shaft rotates one year with the eccentric sleeve, the movement of the cycloidal wheel becomes a plane motion with both revolution and rotation due to the characteristics of the tooth profile curve on the cycloidal wheel and the restriction on the pin gear on the needle gear. When the input shaft rotates positively, the eccentric sleeve also rotates once, and the cycloidal wheel rotates one tooth in the opposite direction to obtain deceleration, and then the W output mechanism is used to transmit the low speed rotation of the cycloidal wheel through the pin shaft to the output shaft. This results in a lower output speed.

 NER GROUP CO.,LIMITED is a professional manufacturer and exporter of gearbox reducers, gear motors and electric motors for several years from China.
We believe that we can cooperate with you on this business and please contact us if you are interested.
You are welcomed to visit our catalogue website for more information:
www.sogears.com
Mobile:+86-18563806647
www.guomaodrive.com
https://twitter.com/gearboxmotor
Viber/Line/Whatsapp/Wechat: 008618563806647
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.;   Skype ID: qingdao411
No.5 Wanshoushan Road, Yantai, Shandong,China

 Geared Motors And Electric Motor Manufacturer

The best service from our transmission drive expert to your inbox directly.

Get in Touch

Yantai Bonway Manufacturer Co.ltd

ANo.160 Changjiang Road, Yantai, Shandong, China(264006)

T+86 535 6330966

W+86 185 63806647

© 2024 Sogears. All Rights Reserved.