English English

Spur Gearboxes

Single speed double reduction gearbox

Single speed double reduction gearbox

Single speed double reduction gearbox, single reduction gearbox, 

P series gearboxes refer to foreign similar products and adopt new design. The main performances are as follows: 1) Highly modular, with fewer types of gauges and more gearbox specifications. 2) The transmission power is large and the operation reliability is high.

Installation form
P series gearboxes are flexible in installation, horizontal or vertical, and can be installed in other forms according to user requirements. Please consult factory. Service life Under the conditions of correct selection and normal use and maintenance, the life of the main parts of the gear box (except the wearing parts) is generally not less than 50,000 hours. The main components of the noise gearbox are precision machined; the gear grinding process uses low-noise trimming technology; the noise-absorbing box structure is carefully assembled and tested, so the gearbox noise is low.
Heat dissipation performance P series single speed double reduction gearbox have good heat dissipation performance, mainly reflected in: 1) high transmission efficiency of gearbox 2) increased surface area of ​​the casing during design 3) large fan and new type of diversion fan, cooling Coil, oil cooler and other cooling methods

single reduction gearbox

Planetary single speed double reduction gearbox installation: 1. When the output shaft is equipped with a coupling, pulley, sprocket, etc., do not hit it. Apply
the screw hole at the outer end of the output shaft, screw in the screw, and press in the
coupling; 2. When installing the pedestal single speed double reduction gearbox on the basis, the installation centerline elevation,
levelness and related dimensions of the connected components should be calibrated. The
coaxiality of the calibrated drive shaft should not exceed the allowable range of the coupling; 3, the vertical single speed double reduction gearbox can be installed at any angle, pay attention to the oil level and ventilation
position.
Use of planetary single speed double reduction gearboxes: 1. Please read the instruction manual of our company before use. Pay attention to unplug the
breathable plastic plug before starting the machine. The single speed double reduction gearbox has been filled with the
specified lubricating oil at the factory. Refer to the instructions for details. 2. The temperature of the working environment of the single speed double reduction gearbox does not exceed 40 °C, and the
surface temperature of the machine body refers to the manual; 3. The single speed double reduction gearbox must not exceed the rated torque; 4. The single speed double reduction gearbox is suitable for both forward and reverse operation; 5. This model is modular design, which can be easily replaced. The lubricating oil should be
kept clean in the gear box. Please refer to the instruction manual for the replacement cycle of
the lubricating oil.
 

single reduction gearbox

Non-standard single speed double reduction gearbox integrated design, single speed double reduction gearbox motor provides a full set, convenient and fast,
user can be used for installation, application of multiple fields, very flexible use. Power plant equipment, metallurgical industry, forging machinery, petrochemical, mining
machinery, lifting machinery, construction industry, environmental protection industry, cable
industry, food machinery, etc. are mostly used.
As a special type of single speed double reduction gearbox family, the hardened surface single speed double reduction gearbox is made of high-strength low-
carbon alloy steel quenched by carbon. Because the hardness of the tooth surface is extremely
high and the precision is extremely high, it is called hard. Tooth surface single speed double reduction gearbox, the
combination is very convenient, the ratio is also very flexible, the cost is also reasonable, can
be used to achieve large-scale design, non-standard planetary single speed double reduction gearbox manufacturers,
performance is safe and reliable.
The center distance and center height of the hardened single speed double reduction gearbox are higher than the priority
number of the priority number. The gears are made of high-strength low-carbon alloy steel.
The hardness and gear precision are very high, and the hard tooth surface is decelerated. The
machine's rotation efficiency is extremely high, the noise is still very small, and the parameters
and structure of the gear are optimized by the special designer.
single reduction gearbox
The planet's word for the planetary single speed double reduction gearbox is taken from its gear layout. Since the gear of the
planetary single speed double reduction gearbox is the three pinions that rotate around the large gear, we call this gear a plan
etary gear layout, so we call this planetary gear layout. The single speed double reduction gearbox is a planetary single speed double reduction gearbox
Planetary single speed double reduction gearbox is divided into two main types according to the output direction: straight type
and right angle type, according to the connection mode; round flange connection, square flang
e connection, according to output mode; smooth straight axis, keyed straight axis, keyhole
output Under the premise of ensuring precision transmission, it is mainly used to reduce the
speed increase torque and reduce the load/motor's moment of inertia ratio.
Has the following advantages: 1. Based on the modular design principle, a larger version of the single speed double reduction gearbox is designed without
increasing the number of internal components. 2. Advanced finite element analysis allows us to provide customers with a more rugged cabinet
under the same weight. 3. The new computer-aided design system combines our experience with ISO/DIN standards.
Based on the application of proprietary gear shaping technology, the load carrying capacity can
be perfectly optimized. 4. Based on the new theory of vibration and noise, the optimized design in the tooth profile and
the box structure can reduce the noise by 15%. 5. The pre-shave hobbing of the helical gear and the root rounding of the bevel gear can
improve the root strength and reduce noise. 6. Optimized oil circuit circulation ensures long-term bearing operation.
Other installation methods can be configured as required. Different accessories can be added to
the single speed double reduction gearbox.
single reduction gearbox
1. Additional bolt holes can be used as transport slots or mounting lugs, and can also be used
to secure standard parts. 2. The new sealing solution can greatly reduce the risk of oil spills. The leak-free seal structure
greatly reduces maintenance. 3. When the site needs to be out of the box for maintenance, the unpacking screw holes on the
end cover make the end cover easy to disassemble. 4. Long life design reduces on-site maintenance work. 5. The large-size box of the horizontal bin is convenient for unpacking inspection and on-site
maintenance.
Non-standard gear box installation: self-contained main box body, end cover, flange, output
shaft and other components can be combined in different ways to form flange mounting,
hanging mounting, lifting installation, etc. The installation form allows the single speed double reduction gearbox to change
in the same way. Easy to use: The output shaft and connecting flange of the single speed double reduction gearbox conform
to the ISO standard. The special gearbox and coupling structure make the installation,
disassembly and maintenance of the site extremely convenient and reliable. Small body, high
ruggedness: 3D CAD graphic design and CAD optimization design plus spheroidal graphite cast
iron body. The teeth and shaft of high-quality alloy steel make the whole structure smaller and
more robust.
single reduction gearbox
The company adheres to the quality policy of “Quality First, Customer First”. Through
continuous technological transformation with high starting point, we will introduce world-class
high-precision equipment, establish a sound quality management system and after-sales service
network, and provide high-quality products and satisfactory services to customers. The hardness
of the hardened gears processed by the company can reach 4000mm, and the precision is stable
to 5, up to 3 levels. In the high-speed box series that has been manufactured, the maximum power
is 58,000 kW and the maximum speed is 63,000 rpm. The company introduced a complete set of
computer-controlled heat treatment equipment and testing equipment from Germany, which can
conduct quenching, carburizing, quenching, nitriding, high-frequency quenching and metallographic
analysis of gears and shafts. The maximum diameter of the carburizing furnace is up to 4000mm,
the depth of the carburized layer is up to 8mm, and the hardness of the tooth surface is up to HRC5
8~62.
single reduction gearbox
The bearings of the transmission parts are all domestic famous brand bearings or imported
bearings, and the seals are made of skeleton oil seals; the structure of the speaker body, the
larger surface area of ​​the cabinet and the large fan; the temperature rise and noise of the
whole machine are reduced, and the reliability of operation is improved. The transmission
power is increased. Parallel axis, orthogonal axis, vertical and horizontal universal box can be
realized. The input mode includes motor coupling flange and shaft input; the output shaft can
be output at right angle or horizontal level, and solid shaft and hollow shaft and flange output
shaft are available. . The gearbox can meet the installation requirements of a small space, and
can also be supplied according to customer requirements. Its volume is 1/2 smaller than the
soft tooth single speed double reduction gearbox, the weight is reduced by half, the service life is increased by 3~4 times, and
the carrying capacity is increased by 8~10 times. Widely used in printing and packaging
machinery, three-dimensional garage equipment, environmental protection machinery,
transportation equipment, chemical equipment, metallurgical mining equipment, steel power
equipment, mixing equipment, road construction machinery, sugar industry, wind power generation,
escalator elevator drive, ship field, light High-power, high-speed ratio, high-torque applications
such as industrial fields, papermaking, metallurgical industry, sewage treatment, building
materials industry, lifting machinery, conveyor lines, and assembly lines. It has a good cost
performance and is conducive to the domestic equipment.
     

single reduction gearbox

Professional production and various series of coaxial single speed double reduction gearbox, F series parallel shaft gear
single speed double reduction gearbox, K series spiral bevel single speed double reduction gearbox, S series helical gear - worm single speed double reduction gearbox T series
steering gear, HB series high power single speed double reduction gearbox, P Series planetary single speed double reduction gearbox and undertake
non-standard single speed double reduction gearbox to map processing, batch price favorably
Product Features:   The new tooth surface high-power gearbox has a large torque range and is modular in design.
It can be installed horizontally or vertically. Solid shafts, hollow bricks and shrink disk hollow
shafts are turned out. Wide application range, high-strength high-quality alloy steel carburizing
and quenching, with hilarious high-life gears and high allowable axial, radial load, low operating
noise, high reliability, compact structure and so on. Model specifications: WH1..3, 5, 7, 9, 11, 13, 15, 17, 19 WH2..4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 WH3..5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 WH4..7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26 WB2..4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 WB3..4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 WB4..5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26

Common faults of servo single speed double reduction gearbox: 1. Bearing damage: related to the bearing assembly process. When replacing gears and worm
gears, try to use original parts and replace them in pairs, and pay attention to tolerance when
assembling the output shaft;  2, the transmission device is not fixed: worm wheel wear or damage, bearing wear or damage,
loose bolts, etc., non-standard planetary single speed double reduction gearbox, fixed transmission, non-standard planetary
single speed double reduction gearbox factory, replace the worm gear, replace the bearing, tighten the bolt, remove Foreign
matter and change the lubricant.
1. The speed single speed double reduction gearbox is generally used for low-speed and high-torque transmission equipment.
The motor, internal combustion engine or other high-speed power is transmitted through the
gears on the input shaft of the single speed double reduction gearbox to mesh the large gears on the output shaft to achieve
the purpose of deceleration. Ordinary single speed double reduction gearboxes will also have several pairs of identical gears to
achieve the desired deceleration effect, the ratio of the number of teeth of the large and small
gears is the transmission ratio. 2. Classification single speed double reduction gearbox is a relatively precise machine. Its purpose is to reduce the speed and
increase the torque. It has a wide variety of models, different models, and different types of
uses. There are many types of single speed double reduction gearboxes. According to the transmission type, they can be
divided into single speed double reduction gearboxes, worm single speed double reduction gearboxes and planetary single speed double reduction gearboxes. According to the
different drive stages, they can be divided into single-stage and multi-stage single speed double reduction gearboxes. According
to the gear shape, they can be divided into cylindrical gears. , bevel single speed double reduction gearbox and
cone-cylindrical single speed double reduction gearbox; according to the transmission arrangement can be divided into
expansion, split and coaxial single speed double reduction gearbox. 3. Features The main feature of the worm single speed double reduction gearbox is that it has a reverse self-locking
function and can have a large reduction ratio. The input shaft and the output shaft are not on
the same axis, nor on the same plane. However, the volume is generally large, the transmission
efficiency is not high, and the accuracy is not high. Harmonic drive of harmonic single speed double reduction gearbox is
flexible
single reduction gearbox
The controllable elastic deformation of the single speed double reduction gearbox element transmits the motion and the
power, and the volume is small and the precision is high, but the disadvantage is that the
flexible wheel has a limited life, is not resistant to impact, and the rigidity is poor compared
with the metal parts. The input speed cannot be too high. The planetary single speed double reduction gearbox has the
advantages of compact structure, small return clearance, high precision, long service life and
large rated output torque. But the price is slightly more expensive. The single speed double reduction gearbox has the
characteristics of small size and large transmission torque. The single speed double reduction gearbox is designed and
manufactured on the basis of the modular combination system. There are many motor
combinations, installation forms and structural schemes. The transmission ratio is finely graded
to meet different working conditions and realize electromechanical integration. The gear
single speed double reduction gearbox has high transmission efficiency, low energy consumption and superior performance.
The cycloidal pinwheel single speed double reduction gearbox is a transmission type that adopts the principle of cycloidal pin
gear meshing planetary transmission. It is an ideal transmission device with many advantages,
wide application and forward and reverse operation.
The single speed double reduction gearbox plays a role in matching the speed and transmitting torque between the prime
mover and the working machine or the actuator. The single speed double reduction gearbox is a relatively precise machine.
The purpose of using the single speed double reduction gearbox is to reduce the speed and increase the torque. According to
the different gear stages, it can be divided into single-stage and multi-stage single speed double reduction gearboxes;
according to the shape of the gear wheel, it can be divided into cylindrical single speed double reduction gearbox, bevel
single speed double reduction gearbox and cone-cylindrical guide single speed double reduction gearbox; Divided into expansion, split and the same
axis single speed double reduction gearbox. The single speed double reduction gearbox is a separate component consisting of a gear transmission, a worm
drive, and a gear-worm drive enclosed in a rigid housing, and is often used as a reduction
transmission between the prime mover and the work machine. The function of matching the
rotational speed and transmitting torque between the prime mover and the working machine
or the actuator is widely used in modern machinery.

single reduction gearbox

Product type and characteristics: The steel rope traction belt conveyor drive adopts NGW type
non-standard planetary single speed double reduction gearbox, which has the characteristics of small size, light weight,
stable operation, high efficiency and low noise. This type of planetary single speed double reduction gearbox uses a sun
gear to float. When the single speed double reduction gearbox is working, the body, the casing, the internal gear, etc. are
fixed. The torque is input from the high speed shaft, decelerated by the internal gear, and
finally output to the steel rope traction belt conveyor by the low speed shaft.
NGW type non-standard planetary single speed double reduction gearbox specific models: K136P, K137P, K143P, K144P,
K147P, K150P, K240P, K241P, K242P, K247P Product type and characteristics: The steel rope
traction belt conveyor drive adopts NGW type non-standard planetary single speed double reduction gearbox, which has
haracteristics of small size, light weight, stable operation, high efficiency and low noise. This
type of planetary single speed double reduction gearbox uses a sun gear to float. When the single speed double reduction gearbox is working, the body,
the casing, the internal gear, etc. are fixed. The torque is input from the high speed shaft,
decelerated by the internal gear, and finally output to the steel rope traction belt conveyor by
the low speed shaft.

Working conditions: 1. The maximum speed of the input shaft is not more than 1500r/min; 2. The working environment temperature of the single speed double reduction gearbox is -40 to +45 °C. If the working
environment temperature is lower than 0 °C, the lubricating oil should be heated to above 0 °C
before starting the equipment. 3. The single speed double reduction gearbox can work in both directions.
Structure type and working principle: It can be seen from the structural diagram that the torque of the motor is input from the high-
speed shaft, and is transmitted to the high-speed sun gear via the floating tooth sleeve. The
sun gear meshes with the planetary gear, and the planetary gear meshes with the inner ring
gear at the same time. Since the inner ring gear is fixed to the body, The planetary wheel
produces a combined motion that rotates both about its own axis and about the axis of the sun
gear. At this time, the torque transmitted to the planetary gear is transmitted to the planetary
shaft due to its revolution, and then the planetary shaft transmits the torque to the planet
carrier fixedly coupled thereto, and then transmits the torque to the inner gear plate and the
floating tooth sleeve. Low speed sun gear. Low-speed torque transmission from the sun gear
to the low-speed shaft is the same as the high-speed stage.
single reduction gearbox
HB series standard industrial gearbox features: 1. H, B high-power single speed double reduction gearbox adopts universal design scheme, which can be changed into
industry-specific gearbox according to customer requirements. 2. Achieve parallel shafts, orthogonal shafts, vertical and horizontal general-purpose cabinets,
with reduced types of components and increased specifications. 3. Adopting the structure of the suction box body, large cabinet surface area and large fan,
cylindrical gear and spiral bevel gear adopt advanced grinding process to improve the temperature
rise, noise reduction and reliability of the whole machine. The power is increased. 4. Input method: motor coupling flange, shaft input. 5. Output mode: solid shaft with flat key, hollow shaft with flat key, hollow shaft with expansion
disc, hollow shaft with spline coupling, solid shaft with spline coupling and solid shaft with flange
coupling. 6. Installation method: horizontal, vertical, swing base, torsion arm. 7. H and B series products have 3~26 type specifications, the number of reduction transmission
stages is 1~4, and the speed ratio is 1.25~450; and the combination of R, K and S series of our
factory gets a larger speed ratio.
technical parameter: 1. Speed ​​ratio range 1.25-450 2. Torque range 2.6-90KN 3. Power range 4-5000KW

Inline helical gear reducer

Helical gear, Helical Gear Motors

Gear motor for sale

Bevel gear, Bevel gear motor, Helical gear, Helical Gear Motors, Spiral bevel gear , Spiral Bevel Gear Motor

Offset gear motor

Helical gear, Helical Gear Motors

Helical worm gear motor sew

Helical gear, Helical Gear Motors, Worm gear, Worm gear motor

Flender type gearboxes

Bevel gear, Helical gear

Cycloidal drive

Cycloidal gear , Cycloidal Gear Motor

Types of electric motor

AC Motor, Induction Motor

Mechanical variable speed drive

Cycloidal gear , Cycloidal Gear Motor, Helical gear, Planetary gear, Planetary gear motor, Spiral Bevel Gear Motor, Worm gear, Worm Gear Motors

Types of gearbox with images

Bevel gear, Helical gear, Spiral bevel gear

Electric motor and gearbox combination

Cycloidal gear , Cycloidal Gear Motor

Sumitomo type cyclo

Cycloidal gear , Cycloidal Gear Motor

Skew Bevel Gear Box

Bevel gear, Spiral bevel gear
     

Date

06 September 2019

Tags

Spur gear

 Geared Motors And Electric Motor Manufacturer

The best service from our transmission drive expert to your inbox directly.

Get in Touch

Yantai Bonway Manufacturer Co.ltd

ANo.160 Changjiang Road, Yantai, Shandong, China(264006)

T+86 535 6330966

W+86 185 63806647

© 2024 Sogears. All Rights Reserved.