Three-Phase General Purpose Motors
TEFC - Rolled Steel
Standard Features:
- Rated Output: 0.25 to 25 HP
- Number of Poles: 2 to 6
- Class F insulation
- Frame Sizes: NEMA 56 to 254/6T
- Efficiency levels: High Efficiency (EPAct) and NEMA Premium®
- Frequency: 60 Hz (dual rated 50 Hz 190-220/380-415V)
- IP55 standard, IP56 optional
- F1 mount as standard
- Foot mount / C-face / Footless availability
- Enclosure: TEFC, TEAO, and TENV as optional
- Aluminum endshields
- Cast Iron flanges for improved strength (182/4TC and larger)
- Internal bolts, giving a clean surface to the motor, avoiding trapping materials and allowing easy paint job after assembly to the load if required
- Double shielded ball bearings on frames 56 to 213/5T. Optional double sealed ball bearings and/or bearing cap
- Versions: General Purpose, Jet Pump, Close-coupled Pump type “JM” and “JP”, and Crop Dryer.
Optional Features:
- IP56 ingress protection
- F2 and F3 mount
- Enclosure: TEAO and TENV
- Regreasable bearings optional on 182/4T and 213/5T
- Double sealed ball bearings and/or bearing cap
- Drip cover
- Internal Aegis® SGR
- Space heaters and thermal protection (thermostats and thermistors)
- Refer to the mod section for more options
ADDITIONAL TECHNICAL DATA
ELECTRICAL DATA: B-17
MECHANICAL DATA: C-7
Features that make a difference:
- New ventilation system for improved
thermal performance
- Robust feet design suitable for tougher
applications
- New and more robust eyebolts design
(frames 182/4T and up) plus a second
eyebolt on non-drive end allowing vertical
lifting capability (frames 213/5T and
254/6T)
- Oversized diagonally split aluminum
terminal box that exceeds IP55
requirements
- Terminal box rotatable in 90 degrees
increments for flexibility during
installation
- Option for internal AEGIS® SGR
- Color coded leads as standard for easy
wiring
- Regreasable ball bearings on 254/6T
frame as standard (optional for 182/4T
and 213/5T)
- IP55 Ingress Protection as standard,
being appropriate for severe
environments
- Bearing cap as standard on flanged
motors, optional on non flanged
- Suitable for VFD operation as per NEMA
MG1 part 31.4.4.2
- Motor frame painting system 500 hours
salt spray resistant
Order Quantity OfOne PieceTwo PiecesThree PiecesAll Quantitesis acceptable.
We accept all quantities even one piece that we would send for you. There are big stock these brands' parts in our warehouse and one or two pieces is not a problem for us. Of courser, the larger quantity, the better price. We suggest to order as more as possible.
Payment could be Telegraphic Transfer or Paypal Or credit card or even Alipay. We have over 30 years experience on international trade and lots of the payment we can accept. We will send you our accounts once you have make decision on which way will pay us.
Delivery way is by various ways such as by air, or by sea or door to door by courier. For small quantity, we suggest to send by air or by courier because the sea freight agents don't like small weight cargos over 100kg below. Also, the transport time is depends on the way that you choose and we will give you some advice when you have place orders.
We are one of many agents for worldwide famous brands in China and we guarantee all these brand parts that we selling is genuine. There is QR code in the parts and all you could check from the brands' official website.