7/8” output shaft. 90 degree- or tee(two side output)
Rpm between 40-100
Torque 120nm or 1200 inch lbs.
12-24 volt
12v to 24v motor
1000inch lbs
50-100 rpm
Outdoor rated
Reversible
7/8” shaft
12-24volt.
Right angle with 7/8” shaft
& TEE – dual output 7/8” shaft
Hollow for 7/8” shaft to travel through
Between 80- 140 nm torque
Rated for installation out doors
motor whit gearbox 12v dc 1hp for 70 rpm,
Existing system
Five Gear boxes driven by motors
RATED OUTPUT POWER
75 KW
CRITICAL SPEED
1480
1500 and 750 RPM
INPUT SPEED
(Two Speed)
230 and 115 RPM
OUTPUT SPEED
(Two Speed)
SHAFT ROTATIONAL DIRECTION AS
CCW
VIEWED FROM COUPLING ENDS .
GEAR SERVICE FACTOR (SF)
1.7 MIN For Induced fan
2.2Kw 2 pole (2900rpm) squirrel cage electric motor on the input side and we need 1450 rpm with 290Nm on the output side.
1 stage gear boxes for 2MW, 4MW and 5MW wind turbine generators with the ratio 1:35 or close to it.
Lead time of the actual samples is 2 weeks.And sample price is as follows:
80N.M: $290
100N.M: $300
120N.M::$330
140N.M:$350
1/Gearbox data
Type of construction B3
Nominal torque 5.100 [Nm]
Output torque 4.917 [Nm]
Service factor 1,04
Transmission ratio 185.36 [1/x]
Output speed 7,8 [1/min]
Mounting type Foot-mounted housing
Output shaft Solid shaft (V90 x 170)
Connection type Feather key
2/Gearbox data
Type of construction B3 D04
Nominal torque 3.100 [Nm]
Output torque 2.179 [Nm]
Service factor 1,42
Transmission ratio 82.14 [1/x]
Output speed 18 [1/min]
Mounting type Foot-mounted housing
Output shaft Solid shaft (V70 x 140)
Connection type Feather key 
NMRV series worm gearbox NMRV 030~190 without motor
1 min = 60rpm or 1400/60rpm Y2 series new preferential design for solar powered electric motor
catalogues for R, RV, NRWM, K and F gears
Reducer XWDY15-7-1/29, pcs 2
Wholesale promotional and energy saving for 10kw alternator
10 kw power required with electromagnetic generator free energy
Please send me your best possible prices.
S. No Description QTY
1 BOX; GEAR 75HS NGC 1
