our product under Electromotor and Worm Gearbox according to under Specification:
1)
A) Worm Gearbox: Size 50, Ratio I=100, B5 Flange,
B) 0.5hp Electromotor, 3phase, 4pole, 220/380v, 50HZ; B5 Flange,
C) Required: 300 Set.
2)
A) Worm Gearbox: Size 60, Ratio I=100, B5 Flange,
B) with 1hp Electromotor, 3phase, 4pole, 220/380v, 50HZ; B5 Flange
C) Required: 300 Set.
3)
A) Worm Gearbox No 1: Size 30, Ratio I=20, B5 flange,
B) Worm Gearbox No 2: Size 40, Ratio I=40, B5 flange,
C) 120 W Electromotor, 3phase, 4pole, 220/380v, 50HZ; B5 flange
D) Required: 100 Set.
4)
A) Worm Gearbox (Type WPKAG60): Size 60, Ratio 40,
b) 1100 W Electromotor, Single Phase, 4pole, 220v, 50HZ;
C) Required: 100 Set.
Helical Gear Box for the Slat Chain Carrier for Stand by Drive
Input Power = 90 KW
Reduction ratio = 267.3:1
Input Speed = 1440 RPM
Output Speed = 5.38 RPM
Output Nominal Torque = 37587 Kg-N
Mechanical Rating = 225 KW
Orientation = Horizontal
Input Shaft OD = 60 MM
Output Shaft OD = 220 MM
High quality Horizontal helical worm worm gear in stock
1- 3 Pcs Standard PBL Gearboxs 2.2 Kw , 170RPM Attached a photos of the required type of gearbox .
2- 50 Pcs Standard Helical Geared Motor 1.5 Kw - with your standard specifications
Powerful high torque 12v dc motors. I am interested in buying 30 Piece/Pieces. 10-20 RPM, 60-120W , 12-24v. 30 pcs
the output speed and input speed of Helical Geared Motor
3 speed gearboxes with reducers, 5000-50 000 sets quantity
A. 1 unit electromotor 7,5 kw , 1500 rpm , 380 v , 3 phase electrim power motor , 7,5 kw , 10 HP , 4 pole ,
1450 rpm , foot mounted B 3. 380 -440 V , 59 Hz , IP 55
insulation Class F , NSK bearings Japan,
register no IDM 000196188 squirrel cage
B. 1 pc electro motor 7 kw, 380 v, 6 pole Teco,
We require geared motors for conveyors . There are three types and total requirement is about 300 pcs every 3 months .
Pls quote based on the below specifications
1）. Helibevel Gear Motor
Power：5.5kw
Reduction ratio:13.22
output speed:109 rpm.
Delivered torque:458 Nm
Safety factor on motor power:1.40
Mounting position :B3 foot mounted O/P horizontal
output: Hollow shaft 40 mm dia.
2）. Helibevel Gear Motor
Power：11kw
Reduction ratio:13.54
output speed:108 rpm
Delivered torque:926 Nm
Safety factor on motor power:1.35
Mounting position :B3 foot mounted O/P horizontal
output: Hollow shaft 50 mm dia.
3）. Helibevel Gear Motor
Power：15kw
Reduction ratio:19.45
output speed:75 rpm
Delivered torque:1812 Nm
Safety factor on motor power:1.20
Mounting position :B3 foot mounted O/P horizontal
output: Hollow shaft 60 mm dia.
All Geared motors we want with these specs, 230V start/ 400v Delta , 50HZ , IP55, and back stop(it should not go reverse motion once current stops) .
For 5.5KW:
output shaft Dia
For 5.5KW motor,Output shaft Dia is 40mm
electric motor 1:40 ratio gearbox
