The motor will work in 240 V single phase, with frequency inverter single phase in 240 V and three phase out.
Glad to receive your inquiry, this is Christine from NER GROUP CO.,LIMITED in China.
About your request, we confirmed them.
For the diesel motor Cumins with 1800 rpm, the motor power will be 382 KW.
Waiting for your kindly reply.
Los dos modelos de motores que mas me interesan son
GKH1-50/22-1P
GKH2-100/17-1P
El pedido minimo seria de 100unidades
Have a nice day!
Gear Reducer with Motor Price:
1. Type: BWD4-59-5.5kW
Ex-works Price: 589 USD/Pcs
2. Type: XWD5-23-4kW
Ex-works Price: 397 USD/Pcs
Have a nice day!
Gear Reducer with Motor Price:
1. Type: XLD5-35-4kW
Ex-works Price: 402 USD/Pcs
2. Type: BWY 14-35-1,1kW motor Y90L-4
Ex-works Price: 389 USD/Pcs
If the motor is 1450 rpm on 50 Hz the speed on out shaft must be average 250 rpm .
The motor and the gear box can be aluminum?
If yes, what is the total weight?
The diameter of the out shaft 40 mm and the length is 120 mm.
The parameters of the motor are: Three phase. 240/410 V, 4 Kw, 50/60 Hz, 1450 rpm on 50 Hz,
The motor will work in 240 V single phase, with frequency inverter single phase in 240 V and three phase out.
Do not confuse the 250 rpm with frequency inverter. The 250 rpm are on 50 Hz.
Are there drawing for the gear or photo with torsion to see the gears?
Have a nice day!
Gear Reducer with Motor Price:
1. Type: BLD11-17-2,2kW
Ex-works Price: 269 USD/Pcs
2. Type: BLD11-15-2.2kW
Ex-works Price: 269 USD/Pcs
lease update PI 2019081408P dated 2019-8-14:
XWD10-43-18,5kW - 1psc
XLD5-35-4kW - 2psc (we have other offer price ca 350 USD/each, please give discount)
PI in RMB with SNAPS CODE
with delivery to Suzhou
We will pay ASAP.
I'm write to inform you that we received your new order payment today, and thanks a lot again for the payment.
Now we're ready to arrange the production for you, about the order's second model XLD5-35-4kW, do you have the nameplate or dimensions?
If yes, please kindly send us, and then we can check and arrange the production soon. Thank you!
Please find below detail
Square body Extruder AC VECTOR DUTY MOTOR QUANTITY = 1
90 KW, 380V-50 HZ, 1500 RPM, 62A
ENCLOSED VENTILATION; DIRECTION OF AIR FLOW NDE-->DE;
DEGREE OF PROTECTION IP23
INCREMENT. ENCODER HTL 1024 S/R (ENCODER HTL1024S/R) with
TEMPERATURE SENSOR PT1000
DESIGN IM B3 (IMB6, IMB7, IMB8, IMV6)
SHAFT WITH FITTED KEY FULL-KEY BALANCING
BEARING: GREATER CANTILEVER FORCES; (Thrust for Pully connection)
VIBRATION SEVERITY GRADE R/A;
SHAFT A. FLANGE ACCURACY GR. R
TERMINAL BOX (ABOVE) CABLE ENTRY ON THE RIGHT
SIGNAL CONNECTION D-END
K09: TERMINAL BOX NON DRIVE END CABLE ROUTING DRIVE END SIGNAL CONNECTION TOP
If any questions; please do not hesitate to contact me
Glad to receive your inquiry, this is Christine from NER GROUP CO.,LIMITED in China.
Here is our price list for 0.55kw-75kw motor, please have a reference.
Also, kindly let us know your needed motor type and purchase quantity. Thank you!
Have a nice day!
Gear Reducer with Motor Price:
Type: BWD3-43-3KW-CZ {BWY22-43-3Kw}
Ex-works Price: 389 USD/Pcs
Please send offer
Motor-gear http://prntscr.com/pml5p0 + https://yadi.sk/i/VkN7pK0iBwEPTw – 1psc + bearing to this gear motor http://prntscr.com/pml5wp (if it possible) 100712200 DL -2psc
Also, about the model WB100-LD59-55kW , we found your motor power maybe have some wrong, it should be 0.55 kw, not 55kw, so please re-check. – you are right, of course 0.55kW, thank you.
Client asks about photo or drawing for
Bearing (Parts) for WB85-WD-29-0.25KW Ex-works Price: 15 USD/Pcs total amount for 2 Pcs: 30 USD - pls send pic or drawing
Could you?
Hello Christine,
please add to PI 2019081408P next pos:
WB100-LD59-0.55kW d=18Fl - ca 818.00 RMB - 1psc
+
Gear Reducer with Motor Price: Type: WB85-WD-29-0.25KW Ex-works Price: 88 USD/Pcs - 1psc
The motor will work in 240 V single phase, with frequency inverter single phase in 240 V and three phase out.
Have a nice day!
Thank you for your new update.
Follow your request, the revised new PI, pictures and drawings for the new 2 models is attached for your reference, please check.
Also, about the model WB100-LD59-55kW , we found your motor power maybe have some wrong, it should be 0.55 kw, not 55kw, so please re-check.
Waiting for your kindly reply.
Good day! Please quote the ff: ASAP!
2UNIT--- MOTOR GEARED 2.2KW 1710/84RPM 440V
3UNIT-- MOTOR GEARED 2.2KW 1710/99RPM 440V
3UNIT- MOTOR GEARED 5.5KW 1765/98RPM 440V 9.4A
1UNIT--MOTOR GEARED 370W 700RPM 440V 0.55A
1UNIT- MOTOR GEARED 3KW 1760/4.8RPM 440V 5.3A
1UNIT- MOTOR 5.5KW 1000RPM 220V TYPE JB1104-68
1UNIT- MOTOR 5.5KW 1170RPM 440V TYPE 132M-6-H
Can you send us a quotation about the following item below:
- Gear Reducer model M157VP2-A-6.943:1, Serie V-Class, Brand Falk.
- Power: 390 Kw/ 523 HP.
- Rpm in: 1195 RPM
- Rpm out: 172.10 RPM
- Ratio: 6.943
- Service factor: 2.43
- Termical capability: 542 THP (3,500 meters above sea level, 30 °C room temperature)
Including:
- one fan mounting in the shaft.
- One kit of lubrication: special respirator falk airmax plus-tall with check valve, viewfinder of oil level, purge valve of oil, stick of level oil.
Nota. include in your quotation sea freight cost to Peru (port of Callao) also delivery time.
Motor-Gear Reducer
Type: XLD3-35-1.5Kw
Ex-works Price: 207 USD/Pcs
Good day! Please quote the ff: ASAP!
2.UNT ABB GEARED MOTOR, 4.5KW 1735/50RPM 440V 3-P
GEARED MOTOR
4.5 kw, 440 volts, 60 hz, 3-phase
1735 rpm
Frame Size: 112 M
Degree of Protection: IP55
Insulation Class: F
Gearbox Output Speed: 50 rpm
Gearbox Shaft Diameter: 40mm
About your question, let's me explain you the details.
If you motor power really is 400 kw, then the frame size will be 355 or 400, not possible is 500 for ABB motor.
You can see the attached data that I marked and send to you.
Also, for the standard size shaft diameter of 400 kw motor, it will be 70mm or 90 mm.
You can also see the attached data that I marked and send to you.
So please re-confirm your frame size and shaft diameter whether is right. Thank you!
Kusile Power Station
CONTROLLED DISCLOSURE
When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to
ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by
third parties without the written consent of Eskom Holdings SOC Ltd, 漏 copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30
Kusile Power Station Supply and Delivery of
Gearboxes Scope of Work
Definition
Disclosure
Classification
2.4
Unique Identifier:
Revision:
1
Page:
6 of 28
Explanation
Controlled Disclosure to external parties (either enforced by law, or
discretionary).
Abbreviations
Abbreviation
2.5
Description
ISO
International Organisation for Standardisation
KPI
Key Performance Indicator
OEM
Original Equipment Manufacturer
OHS
Occupational Health & Safety
PSR
Plant Safety Regulations
SHEQ
Safety, Health, Environmental & Quality
SOW
Scope Of Work
Roles and Responsibilities
2.5.1 Contractor
a) To Supply and Deliver Gearboxes鈥 for Kusile Power Station according to the specifications
and technical requirements on this document.
b) Contractor shall submit all documentation as requested by the Employer.
2.5.2 Employer
a) Compiles and submit scope of work with technical specifications.
b) Performs Quality Control of all spares on delivery at the Employer premises.
2.6
Process for Monitoring
This document will be a once-off document to state the scope of work to supply and deliver Gear
Pumps contract.
2.7
Related/Supporting Documents
N/A
3.
Scope
To supply and deliver Gearboxes鈥 Scope of Work
CONTROLLED DISCLOSURE
When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to
ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by
third parties without the written consent of Eskom Holdings SOC Ltd, 漏 copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30
Kusile Power Station Supply and Delivery of
Gearboxes Scope of Work
No
Material
Number
The motor will work in 240 V single phase, with frequency inverter single phase in 240 V and three phase out.
Unique Identifier:
Revision:
1
Page:
7 of 28
Long Text
Units
1 0574042
GEARBOX: TYPE: PLANETARY; RATIO: 735.8:1;
SPEED: VARIABLE; POWER: 33.9 KW; SHAFT SIZE:
UNIVERSAL 00/200 MM; APPLICATION:
HYDRAULIC DRIVE; ROTATION DIRECTION:
CLOCK/ANTI CLOCKWISE; MANUF P/N:
SL12004/FAR/736/00; HOLLOW SHAFT TYPE FAR
SPLINED; UNIVERSAL INPUT WITH INPUT SAE
CVENDORS ARE RESPONSIBLE FOR ENSURING
THAT THEY ARE PERFORMING AGAINST THE
CORRECT DRAWING REVISION NUMBER (IF
APPLICABLE)
2 0618357
GEARBOX: TYPE: ACTUATOR; RATIO: 53.1; SPEED:
16 RPM; POWER: 0.18 KW; SHAFT SIZE: DIA 20
MM; ROTATION DIRECTION: CLOCKWISE FROM
INPUT; SUPPL P/N: GS80.3; VENDORS ARE
RESPONSIBLE FOR ENSURING THAT THEY ARE
PERFORMING AGAINST THE CORRECT DRAWING
REVISION NUMBER (IF APPLICABLE).
3 0618358
GEARBOX: TYPE: ACTUATOR; RATIO: 51.1; SPEED:
16 RPM; POWER: 0.09 KW; SHAFT SIZE: DIA 16
MM; ROTATION DIRECTION: CLOCKWISE FROM
INPUT; SUPPL P/N: GF50.3; VENDORS ARE
RESPONSIBLE FOR ENSURING THAT THEY ARE
PERFORMING AGAINST THE CORRECT DRAWING
REVISION NUMBER (IF APPLICABLE).
4 0618359
GEARBOX: TYPE: ACTUATOR; RATIO: 442:1 TO 8:1;
SPEED: 16 RPM; POWER: 0.09 KW; SHAFT SIZE:
DIA 20 MM; ROTATION DIRECTION: CLOCKWISE
FROM INPUT; SUPPL P/N: GS160.3/GZ 160.3;
VENDORS ARE RESPONSIBLE FOR ENSURING THAT
THEY ARE PERFORMING AGAINST THE CORRECT
DRAWING REVISION NUMBER (IF APPLICABLE).
10
10
10
10
CONTROLLED DISCLOSURE
When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to
ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by
third parties without the written consent of Eskom Holdings SOC Ltd, 漏 copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30
Kusile Power Station Supply and Delivery of
Gearboxes Scope of Work
Unique Identifier:
Revision:
1
Page:
8 of 28
5 0618360
GEARBOX: TYPE: ACTUATOR; RATIO: 434:1 TO 8:1;
SPEED: 16 RPM; POWER: 0.09 KW; SHAFT SIZE:
DIA 20 MM; ROTATION DIRECTION: CLOCKWISE
FROM INPUT; SUPPL P/N: GS200.3/GZ200.3;
VENDORS ARE RESPONSIBLE FOR ENSURING THAT
THEY ARE PERFORMING AGAINST THE CORRECT
DRAWING REVISION NUMBER (IF APPLICABLE).
10
6 0618361
GEARBOX: TYPE: ACTUATOR; RATIO: 411:1-8:1;
SPEED: 16 RPM; POWER: 4 KW; ROTATION
DIRECTION: CLOCKWISE FROM INPUT; SUPPL P/N:
GS250.3/GZ250.3; VENDORS ARE RESPONSIBLE
FOR ENSURING THAT THEY ARE PERFORMING
AGAINST THE CORRECT DRAWING REVISION
NUMBER (IF APPLICABLE).
The motor will work in 240 V single phase, with frequency inverter single phase in 240 V and three phase out.
10
7 0619943
GEARBOX: TYPE: BEVEL HELICAL; RATIO: 20:1;
SPEED: 1476/74.45 RPM; POWER: 122 KW; SHAFT
SIZE: 35M6/105M6 MM; APPLICATION:
CONVEYOR DRIVE 3 STG; ROTATION DIRECTION:
ANTI CLOCKWISE; DRAWING NO: 97-QHRC3-794
REV 0; OUTPUT SHAFT ON THE RIGHT HAND
SIDEVENDORS ARE RESPONSIBLE FOR ENSURING
THAT THEY ARE PERFORMING AGAINST THE
CORRECT DRAWING REVISION NUMBER (IF
APPLICABLE).
GEARBOX: TYPE: BEVEL HELICAL; RATIO: 14:1;
SPEED: 1476/101.16 RPM; POWER: 151 KW;
SHAFT SIZE: 50K6/105M6 MM; APPLICATION:
CONVEYOR DRIVE 2 STG; ROTATION DIRECTION:
CLOCKWISE; DRAWING NO: 97-QHR2-784 REV 0;
OUTPUT SHAFT ON THE LEFT HAND SIDEVENDORS
ARE RESPONSIBLE FOR ENSURING THAT THEY ARE
PERFORMING AGAINST THE CORRECT DRAWING
REVISION NUMBER (IF APPLICABLE).
10
10
CONTROLLED DISCLOSURE
When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to
ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by
third parties without the written consent of Eskom Holdings SOC Ltd, 漏 copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30
Kusile Power Station Supply and Delivery of
Gearboxes Scope of Work
Unique Identifier:
Revision:
1
Page:
9 of 28
9 0623751
GEARBOX: TYPE: HELICAL DRIVE; RATIO: 1267:1;
SPEED: 1460/1.2 RPM; POWER: 9.36 KW; SHAFT
SIZE: DIA 130 MM; APPLICATION: GEARED
MOTORS; ROTATION DIRECTION: BI DIRECTIONAL;
SUPPL P/N: BF90X-71W/D16DA4WTF/SP/C3; GAS
AIR HEATER 1/2 FLUE GAS AIR SIDE
DRIVEVENDORS ARE RESPONSIBLE FOR ENSURING
THAT THEY ARE PERFORMING AGAINST THE
CORRECT DRAWING REVISION NUMBER (IF
APPLICABLE).
The motor will work in 240 V single phase, with frequency inverter single phase in 240 V and three phase out.
10 0634798
GEARBOX: TYPE: BHELICAL AND SPIRAL BEVEL
GEAR; RATIO: 20:1; SPEED: 1500/74.51 RPM;
POWER: 404 KW; SHAFT SIZE: 60/55 MM;
APPLICATION: CONVEYOR DRIVE T1B; ROTATION
DIRECTION: CLOCKWISE; DRAWING NO: 97QHRF3-794 REV 0; SUPPL P/N: QHRF3-CRN;
HORIZONTAL LOW SPEED SHAFT; RIGHT-ANGLE
SHAFT; 2 STAGE; HIGH SPEED SHAFT TENSION:
RIGHT-ANGLE; LOW SPEED SHAFT EXTENSION:
LEFT; LOW SPEED SHAFT TYPE: NORMAL SOLID
SHAFTVENDORS ARE RESPONSIBLE FOR ENSURING
THAT THEY ARE PERFORMING AGAINST THE
CORRECT DRAWING REVISION NUMBER (IF
APPLICABLE).
11 0634804
GEARBOX: TYPE: BHELICAL AND SPIRAL BEVEL
GEAR; RATIO: 16:1; SPEED: 1500/93.75 RPM;
POWER: 70 KW; SHAFT SIZE: 45/90 MM;
APPLICATION: CONVEYOR DRIVE; ROTATION
DIRECTION: CLOCKWISE; DRAWING NO: 97QHRB2-788 REV 0; SUPPL P/N: QHRB2-CRN;
HORIZONTAL LOW SPEED SHAFT; RIGHT-ANGLE
SHAFT; 2 STAGE; HIGH SPEED SHAFT TENSION:
RIGHT-ANGLE; LOW SPEED SHAFT EXTENSION:
LEFT; LOW SPEED SHAFT TYPE: NORMAL SOLID
SHAFTVENDORS ARE RESPONSIBLE FOR ENSURING
THAT THEY ARE PERFORMING AGAINST THE
CORRECT DRAWING REVISION NUMBER (IF
APPLICABLE).
10
10
10
CONTROLLED DISCLOSURE
When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to
ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by
third parties without the written consent of Eskom Holdings SOC Ltd, 漏 copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30
Kusile Power Station Supply and Delivery of
Gearboxes Scope of Work
Unique Identifier:
Revision:
1
Page:
10 of 28
12 0634805
GEARBOX: TYPE: BHELICAL AND SPIRAL BEVEL
GEAR; RATIO: 16:1; SPEED: 1500/93.75 RPM;
POWER: 70 KW; SHAFT SIZE: 45/90 MM;
APPLICATION: CONVEYOR DRIVE; ROTATION
DIRECTION: ANTI CLOCKWISE; DRAWING NO:
97QHRB2-788 REV 0; SUPPL P/N: QHRB2-CLN;
HORIZONTAL LOW SPEED SHAFT; RIGHT-ANGLE
SHAFT; 2 STAGE; HIGH SPEED SHAFT TENSION:
RIGHT-ANGLE; LOW SPEED SHAFT EXTENSION:
LEFT; LOW SPEED SHAFT TYPE: NORMAL SOLID
SHAFTVENDORS ARE RESPONSIBLE FOR ENSURING
THAT THEY ARE PERFORMING AGAINST THE
CORRECT DRAWING REVISION NUMBER (IF
APPLICABLE).
13 0634807
GEARBOX: TYPE: BHELICAL AND SPIRAL BEVEL
GEAR; RATIO: 20:4; SPEED: 1500/74.51 RPM;
POWER: 505 KW; SHAFT SIZE: 60/55 MM;
APPLICATION: CONVEYOR DRIVE T1B; ROTATION
DIRECTION: ANTI CLOCKWISE; SUPPL P/N: QHRF3CLN; HORIZONTAL LOW SPEED SHAFT; RIGHTANGLE SHAFT; 2 STAGE; HIGH SPEED SHAFT
TENSION: RIGHT-ANGLE; LOW SPEED SHAFT
EXTENSION: LEFT; LOW SPEED SHAFT TYPE:
NORMAL SOLID SHAFTVENDORS ARE
RESPONSIBLE FOR ENSURING THAT THEY ARE
PERFORMING AGAINST THE CORRECT DRAWING
REVISION NUMBER (IF APPLICABLE).
The motor will work in 240 V single phase, with frequency inverter single phase in 240 V and three phase out.
10
10
CONTROLLED DISCLOSURE
When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to
ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by
third parties without the written consent of Eskom Holdings SOC Ltd, 漏 copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30
Kusile Power Station Supply and Delivery of
Gearboxes Scope of Work
Unique Identifier:
Revision:
1
Page:
11 of 28
14 0639150
ASSEMBLY: TYPE: MOTOR, DISTRIBUTOR AND
GEARBOX; APPLICATION: HYDRAULIC DRIVE UNIT;
MATERIAL: CI; SUPPL P/N:
313L221.8FP.82BF.A.GOA.CC; GS4-600-1-G-D90;
DATA SHEET SHALL BE SUPPLIED WITH EVERY
DELIVERY; COMPRISING: HYDRAULIC MOTOR:
DISPLACEMENT: 616CC/REV; STROKE: 58MM;
CONTINOUS PRESSURE: 300BAR; CONTINOUS
SPEED: 575RPM; MAXIMUM SPEED: 750RPM;
POWER: 150KW; SHAFT: MALE 56 UNI221
(STANDARD); SPHERICAL BEARING ROLLER;
CLOCKWISE DIRECTIONAL DISTRIBUTOR: D90
STANDARD; SPEED: 1200RPM; PRESSURE: 500BAR
MAX; FLOW: 1000L/MIN; GEARBOX: RATIO: 21.8;
POWER: 130KW; SPEED: 2000RPM MAX; TORQUE:
66KNM; COMPRISING: HYDRAULIC MOTOR:
DISPLACEMENT: 616CC/REV; STROKE: 58MM;
CONTINOUS PRESSURE: 300BAR; CONTINOUS
SPEED: 575RPM; MAXIMUM SPEED: 750RPM;
POWER: 150KW; SHAFT: MALE 56 UNI221
(STANDARD); SPHERICAL BEARING ROLLER;
CLOCKWISE DIRECTIONAL DISTRIBUTOR: D90
STANDARD; SPEED: 1200RPM; PRESSURE: 500BAR
MAX; FLOW: 1000L/MIN; GEARBOX: RATIO: 21.8;
POWER: 130KW; SPEED: 2000RPM MAX; TORQUE:
66KNM
15 0639649
BREATHER: TYPE: GEARBOX; MATERIAL: 1.0718;
DIMENSIONS: DIA 71 MM; CONNECTION: M30 X
1.5 MM; SPECIFICATION: 9SMNPB28K; SUPPL P/N:
F-2033/G1; VENDORS ARE RESPONSIBLE FOR
ENSURING THAT THEY ARE PERFORMING AGAINST
THE CORRECT DRAWING REVISION NUMBER (IF
APPLICABLE).
16 0641320
GEARBOX: TYPE: HELICAL BEVEL GEAR UNIT;
RATIO: 13.1; SPEED: 5.1 RPM; POWER: 30 KW;
APPLICATION: PANTOGRAPH; ROTATION
DIRECTION: BI DIRECTIONAL; SUPPL P/N: A703UH7013.1 HSB3; VENDORS ARE RESPONSIBLE FOR
ENSURING THAT THEY ARE PERFORMING AGAINST
THE CORRECT DRAWING REVISION NUMBER (IF
APPLICABLE).
10
10
10
